Milan Technology MIL-W0311, MIL-W1311 manual WEP Data Privacy, Wireless Station Access

Wireless Gateway User Guide

SSID	To communicate, all Wireless stations MUST use the same
(ESSID)	SSID/ESSID.
	The default value is default
	Note! The SSID is case sensitive.
Channel No.	Select the value you wish to use on your Wireless LAN. If you experi-
	ence lost connections and/or slow data transfers you may need to
	experiment with different channels to see which is the best.
WEP Data Privacy
Off	If OFF (default), data is NOT encrypted before being transmitted.
64 Bit	•	If selected, data is encrypted, using the default key, before being
Encryption		transmitted. The receiving station must be set to 64 Bit Encryption,
		and have the same Key value in the same position in its key table.
		Otherwise, it will not be able to decrypt the data.
	•	Default Key
		Select the key you wish to be the default. Transmitted data is
		ALWAYS encrypted using the Default Key; the other Keys are for
		decryption only.
	•	Key Table
		•	This table is used when Encrypting and Decrypting data. All
			stations, including this Access Point, always transmit data en-
			crypted using their default key. The key number (1, 2, 3, 4) is
			also transmitted. The receiving station will use the key number
			(1, 2, 3, 4) to determine which key value to use for decryption.
			If the key value does not match the transmitting station, de-
			cryption will fail.
		•	The easiest way to ensure there are no problems is to have
			every Station, including the Access Point, use the same key ta-
			ble (all entries identical). Then, it does not matter which key is
			used as the default key.
128 Bit	•	If selected, data is encrypted using the key before being transmit-
Encryption		ted. The receiving station must be set to use 128 Bit Encryption,
		and have the same Key value. Otherwise, it will not be able to de-
		crypt the data.
	•	Key
		Enter the key value you wish to use. Other stations must have the
		same key.
WEP	Select the appropriate value - "Open System" or "Shared Key". Check
Authentication	your Wireless card's documentation to see what method to use. Some
	Wireless cards do not support both methods.

Wireless Station Access

Enable Wireless Access Point

•If enabled (default), this device can act as a Wireless Access Point.

•If not enabled, no Wireless stations can use this device as a Wire- less Access Point.

18