Milan Technology MIL-W1311, MIL-W0311 manual WAN Status - Direct Connection, Data, Buttons

Configuration

WAN Status – Direct Connection

If the WAN (Ethernet) port is using PPPoE, then clicking the WAN Status link on the Status screen will reveal a screen like the following.

	Figure 8: WAN Status – Direct Connection
Data
WAN Status
Physical Address	The "Hardware" address of this device, as seen by other devices on the
	WAN.
IP Address	The IP Address of this device, as seen by devices on the WAN.
	(This device has 2 IP Addresses; one for the local LAN, and another
	for the WAN port.)
Network Mask	The Network Mask for the above IP Address.
Default Gateway	IP address of the Router/Gateway on the WAN port.
DHCP Client	Displays "Enabled" or "Disabled", indicating whether this device is
	acting as a DHCP client on the external LAN or WAN.
Buttons
Reconnect	Use this button if the connection seems to have been lost, and no data is
	being transferred. (This button has no effect unless acting as a DHCP
	Client.)
Refresh	Update the data on screen.

23