Milan Technology MIL-W1311, MIL-W0311 manual Connect to the Wireless Gateway

Appendix A - Troubleshooting

Problem 3: On the LAN, there is an IP Address conflict involving the Dial-in PC. How do I set the IP Address allocated to the Dial-in PC?

Answer 3: This problem can only occur if the Wireless Gateway's DHCP Server is Disabled.

In this situation, the DHCP Server must still allocate an IP Address to the Dial-in user. To set this IP Address:

1.Connect to the Wireless Gateway

2.On the Quick Setup screen, locate the DHCP Server section, and set both the Start IP Address and the Finish IP Address to the IP Address you wish to be assigned to the Dial-in user.

3.Save these settings.

87