Serial Port
Status
Use this link to view the Serial Port status screen, described later in this chapter.
Modem Properties Screen
This screen will be displayed when the "Modem Properties" button on the Serial Port screen is clicked. Normally, it is not necessary to access this screen.
Figure 20: Modem Properties Screen
Data – Modem Properties Screen
Initial String
Initial String | This is a series of AT commands used to correctly configure your modem | |
| or ISDN. | |
| • | The Initial String can only be changed for the "Other" modem type. |
| • | See Appendix C - AT Commands for further details about the |
|
| required Initial String settings and standard AT commands. |
|
|
|
Other Properties
Dial Type | Select Tone, Pulse or Other to match your system. For Other, you must |
| provide the Dial String. |
|
|
Dial String | The AT command sent to your modem before dialing. For example, |
| "ATDT" tells your modem to use Tone Dialing. |
| Check your modem's documentation to find the correct AT commands. |
|
|
Auto Answer | Enter the command strings which turn the |
Commands | modem or ISDN TA ON and OFF. |
|
|
45
