Milan Technology MIL-W1311, MIL-W0311 manual 10F810A81091, Buttons

		Configuration
Existing Stations	•	This lists the Wireless stations you have entered. If you have not
		entered any stations, this list will be empty.
	•	To delete an entry, select it, and click the "Delete" button. Multiple
		entries may be selected by hold down the CTRL key while select-
		ing. (On the Macintosh, use SHIFT instead of CTRL.)
New station	•	Use this field to add a new station to the list. Just enter its address
Address	•	here, and click the "Add" button.
		Use the software supplied with your Wireless unit to determine its
		address. The address consists of 12 letters (A..F) and digits (0..9)
		like this example:
		10F810A81091
		The address may be shown with separators ( : or - ) between each
		pair of characters.
		Do NOT enter the separators ( : or - ) in this field.
Access	•	For Wireless Stations listed above
Permission		This setting determines what type of access is available to Wireless
		stations whose address has been entered in the "Wireless Stations"
		list.
	•	For Other Wireless Stations
		This setting determines what type of access is available to Wireless
		stations whose address is NOT in the "Wireless Stations" list.
	•	For either category, if neither "Internet" nor "LAN" access is
		enabled, Wireless stations are unable to use this Access Point.
Buttons
Delete	Delete will delete the selected entry or entries in the list.
Add	Add will add the New Station data to the list.
Save	Save will save the other data on the screen. This has no effect on the
	contents of the Wireless Stations list.

19