Milan Technology MIL-W1311, MIL-W0311 manual Connection Log Messages, Buttons, Description

		Configuration
Buttons
Connect	If not connected, this button will display "Connect" and can be used to
Disconnect	establish a connection to your ISP
N/A	If connected to your ISP, this button will display "Disconnect" and can
	be used to hang up the connection.
	If PPPoE is not configured, this button will display "N/A" (not applica-
	ble).
Clear Log	Delete all data currently in the Log. This will make it easier to read new
	messages.
Refresh	Contact this device and update the Log data.
Connection Log Messages
Message		Description
Connect on		Connection attempt has been triggered by the "Connect on De-
Demand		mand" setting.
Manual connection		Connection attempt started by the "Connect" button.
Reset physical		Preparing line for connection attempt.
connection
Connecting to remote		Attempting to connect to the ISP's server.
server
Remote Server		ISP's Server has responded to connection attempt.
located
Start PPP		Attempting to login to ISP's Server and establish a PPP connection.
PPP up successfully		Able to login to ISP's Server and establish a PPP connection.
Idle time-out reached		The connection has been idle for the time period specified in the
		"Idle Time-out" field. The connection will now be terminated.
Disconnecting		The current connection is being terminated, due to either the "Idle
		Time-out" above, or "Disconnect" button being clicked.
Error: Remote Server		ISP's Server did not respond. This could be a Server problem, or a
not found		problem with the link to the Server.
Error: PPP Connec-		Unable to establish a PPP connection with the ISP's Server. This
tion failed		could be a login problem (name or password) or a Server problem.
Error: Connection to		The existing connection has been lost. This could be caused by a
Server lost		power failure, a link failure, or Server failure.
Error: Invalid or		The data received from the ISP's Server could not be processed.
unknown packet type		This could be caused by data corruption (from a bad link), or the
		Server using a protocol which is not supported by this device.

25