Configuration
Quick Setup Screen
The Quick Setup screen, like the example below, will be displayed when you first connect.
Figure 5: Quick Setup Screen
Quick Setup - Overview
This screen contains all the basic data to make the Wireless Gateway operational.
For many users, the default values will be satisfactory, and no changes will be required.
•Router Most users do not need to change these values.
•LAN Settings There is no need to change the LAN settings unless:
•You wish to use a different IP Address range
•You already have a DHCP Server or a Router on your LAN.
See Chapter 5
•WAN Port Settings By default, the Wireless Gateway is configured for WAN access using a "Direct Connection" (cable modem or permanent DSL link) and a dynamic IP Ad- dress (the IP Address is supplied by your ISP when you connect). For this common situation, no changes are required.
13
