Chapter 3

3

Configuration

This Chapter provides details of the configuration process.

Overview

This chapter describes the procedure for:

Quick setup

Wireless access point configuration

Using the Status screens

PCs on your local LAN may also require configuration. For details, see Chapter 4 - PC Con- figuration.

Other configuration may also be required, depending on which features and functions of the Wireless Gateway you wish to use. Use the table below to locate detailed instructions for the required functions.

To Do this:

Refer to:

Configure PCs on your LAN.

Chapter 4:

 

 

PC Configuration

 

 

Learn more about using DHCP on the internal LAN.

Chapter 5:

 

 

DHCP

 

 

Configure and use the Serial (RS232) port, either for Internet access

Chapter 6:

or for Dial-in.

Serial Port

 

 

Configure various options:

Chapter 7:

Set a password for the Wireless Gateway, to protect the configu-

Options

 

ration data.

 

Disable NAT (Network Address Translation),

 

Enable TFTP firmware upgrade feature.

 

Configure Remote Management (configure via the Internet)

 

Access the Printer Port setup screen.

 

 

 

Configure the Wireless Gateway and other routers for a LAN which

Chapter 8:

already has 1 or more routers.

Routing

 

 

Use any of the following features:

Chapter 9:

Special Internet Applications

Advanced Internet

Features

URL Filter

 

Virtual Servers

 

DMZ

 

 

 

Limit Internet Access by individual workstations.

Chapter 10:

 

 

Access Control

 

 

 

10

Page 13
Image 13
Milan Technology MIL-W0311, MIL-W1311 manual Configuration, Overview, To Do this Refer to