Serial Port

 

 

 

 

Start PPP

Having established a physical connection, a PPP connection is now

 

 

being established.

 

 

 

 

PPP up fail

The PPP connection could not be established.

 

 

 

 

PPP up successfully

The PPP connection was established successfully.

 

 

 

 

Stop PPP

The PPP connection was terminated. This will occur at the end of a

 

 

session, or an error condition.

 

 

 

 

Try to hang up

Attempting to get the modem to hang up.

 

 

 

 

Time out

There was no response from the modem

 

 

 

 

No carrier

The number dialed did not answer.

 

No answer

 

 

 

 

 

Idle timer expires

"Disconnect after Idle Time" is Enabled, and the Time-out period

 

 

has been reached. The connection will now be terminated..

 

 

 

 

No dial tone

The modem could not obtain a dial tone.

 

 

 

 

Set baudrate nnnn

The serial line speed is being set to the speed set in the configura-

 

 

tion.

 

 

 

53

Page 56
Image 56
Milan Technology MIL-W1311, MIL-W0311 manual Serial Port