Milan Technology MIL-W0311 manual Data - Special Applications Screen, Special Applications feature

Wireless Gateway User Guide

Managing Special Application Entries

Enable	1.	Select the entry from the drop-down list
	2.	Click "Get Data"
	3.	Check the Enable checkbox
	4.	Click "Update"
Disable	As above, but uncheck the Enable checkbox.
Disable all	On the Advanced Internet screen, you can Enable or Disable the
	Special Applications feature.
Delete	1.	Select the entry from the drop-down list
	2.	Click "Delete"
Modify (Edit)	1.	Select the entry from the drop-down list
	2.	Click "Get Data"
	3.	Make any desired changes
	4.	Click "Update"
Create a new entry	1.	Click "Clear Form"
	2.	Enter the required data, as described below.
	3.	Click "Add".

Data - Special Applications Screen

This data must be obtained from the service provider.

Select Entry

Name	This drop-down list shows all Special Applications which have been defined.
Get Data	After selecting the desired entry, click this button to view its current settings
Button	in the Details section of the screen.
	You can then make any changes required. Click the "Update" button to save
	your changes.
Details
Name	Enter a descriptive name to identify this application entry.
Enable	Use this to Enable or Disable support for this application, as required.
Outgoing
Protocol	The protocol (TCP or UDP) used when you connect to the special applica-
	tion service.
Port Range:	The beginning of the range of port numbers used by the application server,
Start	for data you send to it. If the application uses a single port number, enter it in
	both the "Start" and "Finish" fields.
Port Range:	The end of the range of port numbers used by the application server, for data
Finish	you send.

64