Advanced Internet
Managing User Defined Virtual Servers
Enable a Server
Disable a Server Disable all Servers
Delete
Modify (Edit)
Create a new entry
1.Select the required entry from the
2.Click "Get Data"
3.Check the Enable checkbox
4.Click "Update"
As above, but uncheck the Enable checkbox.
On the Advanced Internet screen, you can Enable or Disable the Virtual Servers feature.
1.Select the entry from the
2.Click "Delete"
1.Select the entry from the
2.Click "Get Data"
3.Make any desired changes
4.Click "Update"
1.Click "Clear Form"
2.Enter the required data, as described below.
3.Click "Add".
Data- User Defined Virtual Servers Screen
WAN IP Address
Current IP Address
This shows the IP Address which Internet users must use to connect to any of your Virtual Servers.
•To Internet Users, ALL your Virtual Servers have the same IP Ad- dress.
•This IP Address is allocated by your ISP. It is better to have a fixed IP Address.
Select Server
Name | This lists any Servers you have defined. Click the "Get Data" button to |
| view the correct data for the selected Server. |
|
|
Get Data | After selecting the desired entry, click this button to view its current |
Button | settings in the Details section of the screen. |
| You can then make any changes required. Click the "Update" button to |
| save your changes. |
|
|
Details |
|
Name | Enter a descriptive name to identify this Server entry. |
|
|
Enable | Use this to Enable or Disable support for this Server, as required. |
|
|
IP Address | The IP Address of the PC on your LAN which is running the Server |
| software. |
|
|
Protocol | Select the protocol (TCP or UDP) used by the Server. |
|
|
71
