GE JGRS14 warranty Lift-Off Oven Door, Broiler Drawer, Broiler Pan and Grid

Page 23

Lift-Off Oven Door

The oven door is

removable, but it is heavy. You may need help removing and replacing the door. Do not lift the

door by the handle. This can cause the glass to break or can cause

damage to the door.

To remove the door,

open it a few inches to the special stop position that will hold the door open. Grasp firmly on each side and lift the door straight up and off the hinges.

NOTE:

Be careful not to place hands between the hinge and the oven door frame as the hinge could snap back and pinch fingers.

While working in the oven area, cover the hinges with towels or empty paper towel rolls to prevent pinched fingers and chipping the porcelain enamel on the frame.

To replace the door, make sure the hinges are in the special stop position. Position the slots in the bottom of the door squarely over the hinges at the same time. If the hinges snap back against the oven frame, pull them back out.

TO CLEAN THE DOOR:

Inside of door:

Soap and water will normally do the job. Heavy spattering or spillovers may require cleaning with a mild abrasive cleaner. Soapy, wet metal pads may also be used. Do not allow food spills with a high sugar or acid content (such as milk, tomatoes, sauerkraut, fruit juices or pie filling) to remain on the surface. They may cause a dull spot even after cleaning.

If necessary, you may use an oven cleaner. Follow the package directions. Do not use oven cleaners, cleansing powders or harsh abrasives on the outside of the door.

Outside of door:

Use soap and water to thoroughly clean the top, sides and front of the oven door. Rinse well. You may also use a glass cleaner to clean the glass on the outside of the door.

Spillage of marinades, fruit juices, tomato sauces and basting materials containing acids may cause discoloration and should be wiped up immediately. When the surface is cool, clean and rinse.

Care and Cleaning

Broiler Drawer

To remove:

1.When the broiler is cool, remove the grid and pan.

2.Pull the broiler drawer out until it

stops, then push it back in about 1.

Broiler compartment

Front frame

Broiler Pan and Grid

After broiling, remove the

broiler pan from the broiler drawer. Remove the grid from the pan. Carefully pour out grease from the pan into a proper container. Wash and rinse the broiler

pan and grid in hot water with a soap-filled or plastic

3.Grasp handle, lift and pull broiler drawer out (lift the rollers located under the drawer over the roller guides in the oven).

To replace:

1.Put the rollers under the broiler drawer behind the roller guide stops in the oven.

2.Hold the broiler drawer in the raised position as you slide it partway into the oven. Then lower the drawer and push it completely closed.

scouring pad.

If food has burned on, sprinkle the grid with detergent while hot and cover with wet paper towels or a dishcloth. Soaking the pan will remove burned on foods.

Both the broiler pan and grid may be cleaned with a commercial oven cleaner.

Do not store a soiled broiler pan and grid anywhere in the oven.

Both the broiler pan and grid can also be cleaned in the dishwasher.

(continued next page)

23

Image 23
Contents UseandCareGuide Help US Help YOU… If YOU Need ServiceUsing Your Oven Important Safety InstructionsWhen You Get Your Oven Use only dry pot holders-moist or Save These InstructionsLift-Off Oven Door Features of Your OvenFeature Index Broiler Drawer ExplainedOven Light ON/OFF. Press to turn the oven light on or off Features of Your Oven ControlOven CONTROL, Clock and Timer Preheat Notification Tone Special Features of Your Oven ControlTones While Setting the Control To cancel the 6 second beepHour, 24 Hour or Clock Black-Out Hour Shut-OffCook and Hold Changing the Speed of the + or Pads Special Features Your Oven ControlFahrenheit or Centigrade Temperature Selection Using Your Oven Oven Moisture How to Set Your Oven for BakingBaking Shelf PositionsType of Food Shelf Position Pan PlacementPreheating Baking PansAluminum Foil CookiesPies CakesTo set the clock, first press Clock How to Set Your Oven for Time BakeHow to Set Immediate Start and Automatic Stop Timed BakingEasy Steps How to Set Delay Start and Automatic StopDo IT Yourself Adjust the Oven ThermostatUse of Aluminum Foil How to Set Your Oven for RoastingRoasting Frozen Roasts Questions and AnswersWhy is my roast crumbling when I try to carve it? Roasting GuideBetween LO Broil and HI Broil How to Set Your Oven for BroilingWhy are my meats not turning out as brown as they should? BroilingBroiling Broiling GuideControl Panel Care and CleaningPorcelain Oven Interior Oven LightBroiler Pan and Grid Lift-Off Oven DoorBroiler Drawer Removable Oven Bottom Minor Adjustments YOU can MakeBroil and Oven Burner Air Adjustment Shutters Problem Possible Cause QUESTIONS? USE this Problem SolverOuter cones Problem SolverYellow flames Yellow tips on Soft blue flames We’ll Be There Warranty

JGRS14 specifications

The GE JGRS14 (General Electric Joint Tactical Ground Station - Ground Radar Sensor 14) is a groundbreaking piece of technology designed for advanced surveillance and reconnaissance missions. It showcases GE's commitment to pushing the boundaries of ground-based radar capabilities, making it a critical asset for military and defense operations.

One of the main features of the JGRS14 is its high resolution imaging radar system, which allows for exceptional target detection at various ranges. This capability is crucial for identifying both stationary and moving targets in complex environments, ensuring operational effectiveness even in challenging weather conditions. The radar system uses advanced signal processing techniques to enhance image clarity, enabling users to achieve more accurate situational awareness and decision-making.

The JGRS14 employs a modular and scalable architecture, meaning it can be adapted to different operational needs while maintaining optimal performance. This flexibility is essential for military units that may require varying levels of surveillance capabilities depending on their mission profiles. Additionally, the system is designed for easy integration with existing military command and control networks, enabling seamless data sharing and improved collaboration among units.

A significant technological advancement in the JGRS14 is its use of artificial intelligence (AI) and machine learning algorithms. These technologies allow the system to process large volumes of data in real time, automatically identifying potential threats and providing actionable intelligence to operators. By reducing the time needed for human analysis, the JGRS14 enhances response times and operational effectiveness.

Another characteristic of the JGRS14 is its rugged design, built to withstand harsh operational environments. This durability ensures that the system remains functional during extreme conditions—whether in deserts, jungles, or cold climates. The compact and lightweight nature of the radar system also allows for easy transport and deployment, making it a valuable tool for rapid response teams.

In summary, the GE JGRS14 demonstrates cutting-edge features and technologies that significantly advance ground surveillance capabilities. With its high-resolution radar, modular design, AI integration, and robust construction, the JGRS14 is positioned to play a critical role in modern military operations, enhancing situational awareness and ensuring mission success in dynamic environments. It exemplifies the future of military radar systems, bridging the gap between technology and operational needs.