GE JGRS14 warranty Minor Adjustments YOU can Make, Removable Oven Bottom

Page 24

CARE AND CLEANING

(continued)

Removable Oven Bottom

The oven bottom can be removed to clean large spills, and to enable you to reach the oven burner.

UnlockLock

TO REMOVE:

1.Slide the tab at the center front of the oven bottom to the left.

2.Lift the oven bottom up and out.

TO REPLACE:

1.Slip the oven bottom into the oven so the tabs in the rear of the oven bottom fit into the slots in the oven back.

2.Lower the front of the oven bottom into place and slide the front tab to the right to lock the oven bottom into place.

The oven bottom has a porcelain enamel finish. To make cleaning easier, protect the oven bottom from excessive spillovers. This is particularly important when baking a fruit pie or other foods with high acid content. Hot fruit fillings or foods that are acidic (such as milk, tomatoes or sauerkraut, and sauces with vinegar or lemon juice) may cause pitting and damage to the porcelain enamel surface.

To protect the oven bottom surface, place a piece of aluminum foil slightly larger than the baking dish or a small cookie sheet on a lower shelf or under the baking dish to catch any spillovers. It should not completely cover the shelf as this would cause uneven heat in the oven. Aluminum foil should not be placed on the oven bottom.

If a spillover does occur on the oven bottom, allow the oven to cool first. You can clean the oven bottom with soap and water, a mild abrasive cleanser or soap-filled abrasive pads. Rinse well.

MINOR ADJUSTMENTS YOU CAN MAKE

Broil and Oven Burner Air Adjustment Shutters

Air adjustment shutters for the burner regulate the flow of air to the flames.

To adjust the air shutter, remove the oven bottom. Turn the burner full on and check the flames. The burner flames should not flutter or blow away from the burner. They should be blue in color with no trace of yellow. Foreign particles in the gas line may cause an orange flame at first, but this will soon disappear. If the flames are yellow or flutter, open the air shutter more. If they blow away from the burner, close the air shutter more.

If necessary, use a

Loosen

screwdriver to

 

loosen the air shutter

 

screw. Then adjust

Air Adjustment

the air shutter and,

Shutter

when the flames are

 

right, retighten the

 

air shutter screw.

 

To adjust the orifice hoods, check the inner cone of the flame.

WARNING: If you attempt to measure the inner cone of the flame, please use caution. Burns could result.

The inner cone of the

 

Inner cone

1/2″

of flame

flames should be about

 

 

1/2″ long. If the flames

 

Burner

are not right, use a 1/2″

 

 

 

open-end wrench or

 

 

adjustable joint pliers to

 

 

adjust the orifice hood.

 

 

To shorten the cones,

 

 

tighten the orifice

Nat.

 

hood by turning in

 

 

the “L.P.” direction.

 

 

To lengthen the

 

L.P.

cones, loosen the

 

 

 

orifice hood by

 

 

turning in the “Nat.”

 

 

direction.

 

 

When checking the flames, before and after adjustments, the oven door should be closed.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents UseandCareGuide If YOU Need Service Help US Help YOU…Important Safety Instructions When You Get Your OvenUsing Your Oven Save These Instructions Use only dry pot holders-moist orFeatures of Your Oven Feature Index Broiler DrawerExplained Lift-Off Oven DoorFeatures of Your Oven Control Oven Light ON/OFF. Press to turn the oven light on or offOven CONTROL, Clock and Timer Special Features of Your Oven Control Tones While Setting the ControlTo cancel the 6 second beep Preheat Notification ToneHour Shut-Off Cook and HoldHour, 24 Hour or Clock Black-Out Special Features Your Oven Control Fahrenheit or Centigrade Temperature SelectionChanging the Speed of the + or Pads Using Your Oven How to Set Your Oven for Baking BakingShelf Positions Oven MoisturePan Placement PreheatingBaking Pans Type of Food Shelf PositionCookies PiesCakes Aluminum FoilHow to Set Your Oven for Time Bake How to Set Immediate Start and Automatic StopTimed Baking To set the clock, first press ClockHow to Set Delay Start and Automatic Stop Easy StepsAdjust the Oven Thermostat Do IT YourselfHow to Set Your Oven for Roasting RoastingUse of Aluminum Foil Questions and Answers Why is my roast crumbling when I try to carve it?Roasting Guide Frozen RoastsHow to Set Your Oven for Broiling Why are my meats not turning out as brown as they should?Broiling Between LO Broil and HI BroilBroiling Guide BroilingCare and Cleaning Porcelain Oven InteriorOven Light Control PanelLift-Off Oven Door Broiler DrawerBroiler Pan and Grid Minor Adjustments YOU can Make Broil and Oven Burner Air Adjustment ShuttersRemovable Oven Bottom QUESTIONS? USE this Problem Solver Problem Possible CauseProblem Solver Yellow flames Yellow tips on Soft blue flamesOuter cones We’ll Be There Warranty

JGRS14 specifications

The GE JGRS14 (General Electric Joint Tactical Ground Station - Ground Radar Sensor 14) is a groundbreaking piece of technology designed for advanced surveillance and reconnaissance missions. It showcases GE's commitment to pushing the boundaries of ground-based radar capabilities, making it a critical asset for military and defense operations.

One of the main features of the JGRS14 is its high resolution imaging radar system, which allows for exceptional target detection at various ranges. This capability is crucial for identifying both stationary and moving targets in complex environments, ensuring operational effectiveness even in challenging weather conditions. The radar system uses advanced signal processing techniques to enhance image clarity, enabling users to achieve more accurate situational awareness and decision-making.

The JGRS14 employs a modular and scalable architecture, meaning it can be adapted to different operational needs while maintaining optimal performance. This flexibility is essential for military units that may require varying levels of surveillance capabilities depending on their mission profiles. Additionally, the system is designed for easy integration with existing military command and control networks, enabling seamless data sharing and improved collaboration among units.

A significant technological advancement in the JGRS14 is its use of artificial intelligence (AI) and machine learning algorithms. These technologies allow the system to process large volumes of data in real time, automatically identifying potential threats and providing actionable intelligence to operators. By reducing the time needed for human analysis, the JGRS14 enhances response times and operational effectiveness.

Another characteristic of the JGRS14 is its rugged design, built to withstand harsh operational environments. This durability ensures that the system remains functional during extreme conditions—whether in deserts, jungles, or cold climates. The compact and lightweight nature of the radar system also allows for easy transport and deployment, making it a valuable tool for rapid response teams.

In summary, the GE JGRS14 demonstrates cutting-edge features and technologies that significantly advance ground surveillance capabilities. With its high-resolution radar, modular design, AI integration, and robust construction, the JGRS14 is positioned to play a critical role in modern military operations, enhancing situational awareness and ensuring mission success in dynamic environments. It exemplifies the future of military radar systems, bridging the gap between technology and operational needs.
Top Page Image Contents