GE IM-5SS Install the Icemaker Fill CUP and Insert, Pushed out Back Refrigerator

Page 13

Installation Instructions

6POWER CORD ADAPTER

There are two power cord adapters included with the kit; be sure to use the one specified in the Parts List on page 7. Plug the female end of the power cord adapter (21) onto the male terminals on the icemaker power cord. When connecting the adapter to the power cord, make sure the seal is in place between the connectors. Secure the power cord adapter to the icemaker by putting it into the hook at the back of the icemaker and attaching it to the icemaker with a wire tie (23).

 

21

Hook

Seal

 

Wire tie

Hook

9

MOUNT THE ICEMAKER

•Lift the icemaker up and hang it on the icemaker bracket (24). Make sure the insulated fill tube (15) goes into the fill cup (18) opening. To secure the icemaker to the bracket (24), use two screws (16) and install as shown.

Make sure:

•The power cord is still firmly in the socket.

•The insulated fill tube (15) extends into the fill cup opening at the back of the icemaker. (Check the rear of the refrigerator to make sure that the fill tube has not

pushed out the

15

back of the

24

16

refrigerator).

18

• The icemaker is secured to the bracket.

7 INSTALL THE ICEMAKER FILL CUP AND INSERT

Install the icemaker fill cup (center-mounted) (18) and icemaker insert (19) into the icemaker as shown.

18

19

8PLUG IN THE ICEMAKER

Holding the icemaker in place, insert the power cord plug into the socket, making sure that the prongs and holes are matched. Press the plug firmly into the socket. Lock the plug in place by clipping the restraints onto each side of the plug. Make sure the restraints click into place.

10INSTALL THE ICE BUCKET

Place the ice bucket (11) under the icemaker.

Make sure the icemaker power switch is set to O (off).

11

11ATTACH WARRANTY LABEL

A label (9) is provided with this kit to record the date of installation for warranty purposes. Apply it to the back of the refrigerator.

12KEEP THIS MANUAL

The warranty for the icemaker is printed in this manual. Keep this manual with your Refrigerator Owner’s Manual.

The icemaker installation inside the freezer is now complete. Continue to the Installing the Water Valve Assembly section.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Which instructions should you follow? Kit IM-5SSRead and Save These Instructions About the automatic icemaker When you should set the icemaker power switch to O offAutomatic Icemaker Preparing for VacationIcemaker power switch Move the switch to the I on position Before you call for service…Needs cleaning O off position Water supply turned off orWhich Instructions should YOU FOLLOW? Damage SHIPMENT/INSTALLATIONAre YOU Replacing AN Icemaker with this KIT? Read these instructions completely and carefullyContents of KIT IM-5SS Installation InstructionsParts List Use with Installation Instructions Prepare for Installation Icemaker Installation Instructions CInstall Fill Tube Extension Tools YOU will NeedInstall the Icemaker Fill CUP Power Cord AdapterInstall the ICE Bucket Attach Warranty LabelRemove the Cover Water Valve Assembly Installation Instructions CAttach the Water Valve Water Valve Installed Install Water Line ClampRoute the Plastic Water Line Attach the Plastic Water LineInstall Fill Tube Icemaker Installation Instructions KInstall Mounting Bracket Remove Fill Hole PlugPushed out Back Refrigerator Install the Icemaker Fill CUP and InsertWater Valve Assembly Installation Instructions K Route and Attach the Plastic Water Line Before YOU Begin Installing the Water LineWhat YOU will Need Choose the Valve Location Shut OFF the Main Water SupplyDrill the Hole for Valve Connect the Tubing to Valve Fasten the Shutoff ValveTighten the Pipe Clamp Route the TubingTurn the Water on AT the Shutoff Valve Connect the Tubing to the RefrigeratorPlug in the Refrigerator Start the IcemakerWhat Is Not Covered for customers in the United States Icemaker WarrantyFor The Period Of We Will Replace Quelles instructions devez- vous suivre? Trousse IM-5SSLisez ET Conservez CES Instructions Machine à glaçons automatique La machine à glaçons automatiquePréparation à un départ de longue durée Bruits normaux que vous pouvez entendre Avant d’appeler un réparateurDurée requise pour l’installation 20-60 minutes Dommages EXPÉDITION/ InstallationQuelles Instructions DEVEZ- Vous SUIVRE? Lisez ces instructions complètement et attentivementContenu DE LA Trousse IM-5SS Instructions d’installationCollier de serrage Étiquette de garantie Préparez Votre Installation Instructions D’INSTALLATION DE LA Machine Glaçons CInstallez LA Conduite D’ALIMENTATION D’EAU Outils NécessairesMontez LA Machine À Glaçons Branchez LA Machine À GlaçonsAdaptateur DE Cordon D’ALIMENTATION Électrique Collez L’ÉTIQUETTE DE Garantie Installez LE BAC À GlaçonsConservez CE Manuel Enlevez LE CouvercleFixez LE Collier DE Serrage Fixez LE Robinet D’EAUPlacez LA Conduite D’EAU EN Matière Plastique Branchez LA Conduite D’EAU UNE Fois LE Robinet D’EAU InstalléFixez LA Conduite D’EAU EN Matière Plastique Attachez la conduite d’eau en matière plastiqueInstallez LE Support DE Montage Instructions D’INSTALLATION DE LA Machine À Glaçons KEnlevez LE Capuchon DU Trou D’ALIMENTATION Montez LE Tuyau D’ALIMENTATION IsoléMettez le commutateur de marche de la Installez le récipient de remplissage de la machineConservez LE Présent Manuel Fixez LA Machine À GlaçonsInstructions D’INSTALLATION DE L’ENSEMBLE DE Robinet D’EAU K Raccord ’arrivée de conduite d’eau Avant DE Commencer Installation DE LA Conduite D’EAUCE Dont Vous Aurez Besoin Percez UN Trou Pour LE Robinet Choisissez L’EMPLACEMENT DU RobinetFermez L’ALIMENTATION Principale D’EAU SuiteBranchez LE Tuyau AU Robinet Fixez LE Robinet D’ARRÊTSerrez LE Collier DE Serrage Acheminez LE TuyauBranchez LE Tuyau À Votre Réfrigérateur Branchez Votre Réfrigérateur Fermez L’EAU AU Niveau DU Robinet D’ARRÊTMettez EN Marche LA Machine À Glaçons Pour une période de Nous remplacerons Garantie de la machine à glaçonsCe qui n’est pas couvert pour nos clients des États-Unis Ce qui n’est pas couvert pour nos clients du CanadaService de réparations Service à la clientèleProlongation de garantie Visitez notre site Web ou appelez-nous auInformación de seguridad Instrucciones de operación LEA Y Conserve Estas Instrucciones Máquina automática de hielos Sobre la máquina automática de hielosEsté abierta Antes de llamar a solicitar servicio…El control de la temperatura No está en un nivel Suficientemente frío¿ESTÁ Reemplazando LA Máquina DE Hielos CON Este KIT? ¿CUÁLES Instrucciones SE Deberán SEGUIR?Daños EN EL Envío / Instalación Lea estas instrucciones completa y cuidadosamenteContenido DEL KIT IM-5SS Instrucciones para la instalaciónLista de partes Utilice con las instrucciones de instalación Herramientas Necesarias Instrucciones Para LA Instalación DE LA Máquina DE Hielos CInstale Extensión DEL Tubo DE Llenado Prepárese Para LA InstalaciónConecte LA Máquina DE Hielos Adaptador DEL Cable DE CorrienteInstale LA Taza DE Llenado Monte LA Máquina DE HielosPegue LA Etiqueta DE Garantía Instale LA Cubeta DE HielosGuarde Este Manual Retire LA CubiertaUNA LA Abrazadera DE Alivio DE Presión Instale LA Válvula DEL AguaDirija LA Tubería Plástica DEL Agua Instale LA Tubería Plástica DEL Agua Conecte LA Tubería DEL AguaVálvula DEL Agua Instalada Instale EL Tubo DE Relleno Instrucciones Para LA Instalación DE LA Máquina DE Hielos KInstale EL Sostenedor DE Montaje Retire EL Tapón DE Relleno DE OrificioMontaje LA Máquina DE Hielos Instale LA Cubeta DE Hielos Llave de 1/4″ y 5/16″ o llave ajustable Dirija E Instale LA Tubería Plástica DEL Agua Antes DE Iniciar Instalación DE LA Tubería DEL AguaQUÉ Necesita Cierre EL Suministro Principal DE Agua Perfore EL Orificio Para LA VálvulaSeleccione LA Ubicación DE LA Válvula Conecte LA Tubería a LA Válvula Instale LA Válvula DE CierreApriete LA Abrazadera DEL Tubo Dirija LA TuberíaConecte EL Refrigerador Conecte LA Tubería AL RefrigeradorInicie LA Máquina DE Hielos Abra LA Llave DEL Agua EN LA Válvula DE CierreNotas Notas Notas Notas Por el período de Reemplazaremos Garantía de la máquina de hielosQué no está cubierto para clientes en los EE.UU Programación de servicio Servicio al Consumidor Página Web de GE AppliancesEstudio de diseño de la vida real Garantía ampliadaCanada, call Consumer Support

IM-5SS specifications

The GE IM-5SS is an innovative, high-performance industrial machine designed to address the demanding needs of the manufacturing and processing industries. Known for its robust build and advanced technologies, the IM-5SS stands out among its competitors.

One of the main features of the GE IM-5SS is its highly efficient electric motor, which provides excellent torque and speed control. This electric motor ensures that the machine operates smoothly, even under heavy loads, making it ideal for continuous operations in industrial settings. The machine's drive system is designed for reliability and longevity, reducing downtime and maintenance costs.

The IM-5SS employs cutting-edge digital control technology, allowing for precise monitoring and adjustment of various operational parameters. This technology integrates seamlessly with existing manufacturing systems, enabling operators to maintain optimal performance levels and improve overall efficiency. The user-friendly interface offers operators versatile control options, including remote operation capabilities, which significantly enhance usability.

Another highlight of the GE IM-5SS is its advanced safety features. The machine is equipped with multiple safety mechanisms, including emergency stop buttons, overload protection, and safety interlocks. These features ensure that the machine operates safely in compliance with industry regulations, protecting both the operators and the equipment.

In terms of versatility, the IM-5SS can be customized to meet specific application requirements. It supports a wide range of materials and processing methods, making it suitable for various industries, including automotive, aerospace, and food processing. Its adaptability is a key asset for businesses looking to optimize their production lines.

The machine's energy efficiency is another significant advantage. Designed with environmentally-friendly technologies, the IM-5SS minimizes energy consumption while maximizing productivity. This focus on sustainability not only helps businesses reduce operational costs but also contributes to their corporate social responsibility goals.

Overall, the GE IM-5SS is an exceptional industrial machine that combines performance, safety, and adaptability. Its advanced features and technologies make it a valuable asset for manufacturers seeking to enhance their operational efficiency and sustainability. With its robust design and modern capabilities, the IM-5SS is a reliable choice for those looking to invest in cutting-edge industrial machinery.
Top Page Image Contents