GE FGB-M05 manual Pause, Stop requested, Error, Machine-mode

Page 7

Rev. May 2001

GraviMaster-FGB-M05 (S)

Page 6

 

Gravimetric Blender

 

Pause

When the pause-command is given for a temporary stop the blender will stop after the cycle is complete.

Stop requested

The blender is operating but has received a stop-command. The stop-command will be executed at the end of a batch-cycle. This status will be replaced automatically with ‘standby’ if nothing is done. If a start-command is given during the status ‘stop requested’ the status will be ‘operate’ again.

Error

The controller has detected an error and therefore the system will stop. In a sub-menu at the operator-interface the error will be displayed. The error situation can be recovered using the <ENTER> command. The error must be solved then.

2.3Machine-mode

The controller can be in two modes: Automatic and Manual. The operator can change the mode using the menu item ‘controller’. This changing of mode is only possible while the blender has status ‘standby’.

If a controller is in Automatic-mode, the recipe will be executed without the need of an operator. This mode is used for production purposes and is only dependent on the settings ‘production-mode’.

In automatic mode the keys mentioned below mean:

F5 Start-command (start-key)

F6 Stop-command (stop-key)

F7 Pause-command

F8 Continue-command (clear pause)

After a start-command in Manual-mode one batch will be executed. After this the machine- status will be ‘standby’ again. The weighbin and mixbin-valve can be controlled manually.

In manual mode the keys mentioned below meaning:

F5 Step-command (One component of a batch)

F6 Reset-command (Back to the first component of a batch)

F7 Empty weighbin

F8 Empty mixbin

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Serial No ISO 08.01.02.064.GB 986731 Rev. May ManualIntroduction Controls Installation Introduction Gravimetric Feeding Options are Features areStandby Blender start-upBlender status InactiveMachine-mode ErrorPause Stop requestedContinue Weight-AlarmWeight-Error Production-modesCombination VolumetricDispense modes GravimetricTotal Recipe to weight calculationMethod Standard ExampleAdding extra materials Method PercentageEmpty regrind Control Additive to regrindAdditive to Regrind Regrind controlStock Silo Control Dispense is correct DispensingDispense not correct too little Calculations Dispense not correct too muchCondition 1. The mixbin-vale may not be open if present Condition 2. The mixerchamber may not be fullDatalogging EQ-Net Certificate ISO Certificat Function KEY in MACHINE-MODE Operator-interface KeyboardKey Description Text input field User controlButton Number input fieldChange components Status Operating Mode Automatic0OPERATING Auto Actions Example Add a new componentWhite ?ADDITIVE ? ?WHITE? NaturalWhite Natural ? White Natural Regrind Additive2 Add/change recipes Option Menu in EDIT-RECIPE Field of a RecipeExample Add a new recipe Standard Step ‘edit recipes’ EnterAdditive White PercentageChange current recipe Production screen Timely informationCrates Yellow Material usage screenTare of the weighbin Adjustment of the gravimetric blenderInput & Output monitor Calibration of the weigh binPublic parameters Standard adjustmentHardware-reactiontime Overview of parametersPulse Parameter Description InitContinue GravimetricProtected parameters Protected Parameters Change entrycode Reports and overviewsRevision code of the system Change date and timeMenu hierarchy Controller ProductionSystem Mounting ServicesRev. May GraviMaster-FGB-M05 S Gravimetric Blender Alarms Alarm reports and solutions Alarm-message Description Action to cancel alarm Rev. May GraviMaster-FGB-M05 S Gravimetric Blender Status Operating Adjusting sensor sensitivity MaintenanceCleaning the machine Replacement of parts Replacement of printed circuitTransportation of the GraviMaster Valves specifications Safety measuresGeneral machine specifications User-interface specificationsEin Electrical diagrams Rev. May GraviMaster-FGB-M05 S Gravimetric Blender Rev. May GraviMaster-FGB-M05 S Gravimetric Blender

FGB-M05 specifications

The GE FGB-M05 is a cutting-edge gas turbine designed for a variety of industrial applications, showcasing remarkable efficiency and advanced technology. As a part of General Electric's extensive portfolio of power generation solutions, the FGB-M05 stands out for its versatility and reliability.

One of the main features of the FGB-M05 is its modular design, which allows for easy maintenance and adaptability to different operating conditions. This modularity helps reduce downtime and enhances overall operational efficiency. The gas turbine is engineered to optimize performance across a wide range of workloads, making it suitable for both base load and peak shaving applications.

Incorporating advanced aerodynamics, the FGB-M05 leverages high-efficiency compressor stages that significantly improve its operational performance. The turbine features state-of-the-art cooling technologies that enhance combustion efficiency while ensuring longer equipment life. This is particularly important in high-temperature applications, where maintaining material integrity is crucial.

The FGB-M05 is equipped with sophisticated control systems that enable real-time monitoring and optimization of its operational parameters. These control systems enhance the turbine’s capability to respond dynamically to changing load demands, ensuring that it operates at peak efficiency at all times. Additionally, the turbine supports a range of fuels, including natural gas and biogas, making it a versatile choice for various power generation needs.

Furthermore, the FGB-M05 incorporates advanced emissions control technologies, reducing its environmental impact. It is designed to meet stringent emissions regulations, boasting low NOx and CO emissions levels, which are essential for compliance in many regions.

The GE FGB-M05 gas turbine is also noted for its compact footprint, making it an ideal solution for locations where space is limited. Its combination of high performance, flexibility, and reduced emissions makes it a preferred choice for energy providers looking to invest in sustainable and efficient power generation technologies.

In summary, the GE FGB-M05 gas turbine stands as a testament to modern engineering, combining innovative features, robust technology, and a commitment to environmental responsibility. Whether for industrial applications, peaking plants, or renewable integration, the FGB-M05 delivers reliability and excellence in performance.
Top Page Image Contents