Using the surface units, Safety, How to Set

Using the surface units.

www.geappliances.ca

Throughout this manual, features and appearance may vary from your model.

Safety

How to Set

Push the knob in and turn in either direction to the setting you want.

At both OFF and HI the control clicks into position. You may hear slight clicking sounds during cooking, indicating the control is keeping the power level you set.

The control must be pushed in to set only from the OFF position. When the control is in any position other than OFF, it may be rotated without pushing it in.

The UNIT ON indicator light will glow when any surface unit is on.

Be sure you turn the control knob to OFF when you finish cooking.

Cooktop temperatures increase with the number of surface units that are on. With 3 or 4 units turned on, surface temperatures are high so be careful when touching the cooktop.

A HOT SURFACE indicator light will glow when any radiant element is turned on and will remain on until the surface is cooled to approximately 150°F.

NOTE:

■It comes on when the unit is hot to the touch.

■It stays on even after the unit is turned off.

■It glows brightly until the unit is cooled to approximately 150°F.

Instructions Operating Instructions

About the radiant surface units…

SURFACE

COOKING

Never cook directly on the glass. Always use cookware.

The radiant cooktop features heating units beneath a smooth glass surface.

NOTE: A slight odor is normal when a new cooktop is used for the first time. It is caused by the heating of new parts and insulating materials and will disappear in a short time.

The surface unit will cycle on and off to maintain your selected control setting.

■Water stains (mineral deposits) are removable using the cleaning cream or full strength white vinegar.

■Use of window cleaner may leave an iridescent film on the cooktop. The cleaning cream will remove this discoloration.

■Don’t store heavy items above the cooktop. If they drop onto the cooktop, they can cause damage.

OFF CENTER

Always place the pan in the center of the surface unit you are cooking on.

It is safe to place hot cookware from the oven or surface on the glass cooktop when the surface is cool.

Even after the surface units are turned off, the glass cooktop retains enough heat to continue cooking. To avoid overcooking, remove pans from the surface units when the food is cooked. Avoid placing anything on the surface unit until it has cooled completely.

■Do not use the surface as a cutting board.

	Do not slide
DRAGGING	cookware across
DRAGGING	the cooktop

because it can scratch the glass—

the glass is scratch-resistant, not scratchproof.

Care and Cleaning Troubleshooting Tips

The right front surface unit has 2 cooking sizes to select from so you can match the size of the unit to the size of the cookware you are using.

Dual Surface Unit Knob (on some models)

To use the large (9-inch) surface unit, turn the COIL SELECT knob clockwise to . Push in and turn the control knob to the desired setting. The unit will heat the entire area contained by the larger circle.

To use the small (6-inch) surface unit, turn the COIL SELECT knob counterclockwise to . Push in and turn the control knob to the desired setting. The unit will only heat the area inside the smaller circle.

Consumer Support

JCP340, JCP350 specifications

The GE JCP350 and JCP340 models are notable offerings from General Electric, designed to provide efficient and reliable performance for various applications, particularly in the fields of commercial and industrial operations. These products embody cutting-edge technologies with emphasis on operational efficiency, safety, and ease of use.

The GE JCP350 is a powerful and versatile generator that can deliver an impressive output, making it suitable for large-scale power requirements. One of its main features is the robust engine built to ensure longevity and durability under demanding conditions. Its high fuel efficiency is coupled with an advanced engine management system that optimizes performance while minimizing emissions.

A standout characteristic of the JCP350 is its smart control panel that integrates advanced monitoring technology. This allows users to track performance metrics in real-time, providing critical data that aids in predictive maintenance. The generator is also designed with noise reduction features, ensuring quieter operation which is crucial in environments where sound levels must be kept to a minimum.

On the other hand, the GE JCP340 serves as a slightly more compact yet equally efficient alternative. It is engineered to handle medium-scale applications and is known for its user-friendly interface. The generator boasts a lightweight design which facilitates easier transportation and installation. Like its counterpart, the JCP340 is equipped with modern diagnostics systems that enhance reliability and assist in trouble-free operation.

Both the JCP350 and JCP340 are designed with safety in mind. They come with built-in overload protections and automatic shut-off mechanisms that ensure user safety and protect the equipment from damage. In addition, the generators are compliant with various industry standards, making them suitable for diverse applications across different sectors.

Innovation is at the core of both models, incorporating advanced technologies such as remote monitoring capabilities. This feature enables users to access operational data remotely, delivering peace of mind and ensuring that performance can be assessed from anywhere.

In summary, the GE JCP350 and JCP340 generators stand out for their exceptional performance, fuel efficiency, and advanced features that cater to the evolving needs of various industries. These generators reflect GE's commitment to reliability and innovation, making them a solid choice for businesses seeking quality power solutions.