LP Conversion Instructions
Gas Cooktop
PGP989
Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com
BEFORE YOU BEGIN
Read these instructions completely and carefully. | • This cooktop is factory set for natural gas operation. | ||
• | IMPORTANT – Save these | Conversion to LP operation should be performed | |
by a qualified technician or installer. Keep these | |||
| instructions for local inspector’s use. | instructions for future reference. When converting | |
• | IMPORTANT – Observe all | to LP, save the original parts for possible future | |
• Product failure due to improper installation is not | |||
| governing codes and ordinances. | covered under the GE Appliance Warranty. | |
• | Note to Installer – Be sure to leave these | ||
| |||
| instructions with the Consumer. |
| |
• | Note to Consumer – Keep these |
| |
| instructions for future reference. |
| |
FOR YOUR SAFETY:
WARNING – If you are using LP (bottled) gas, all adjustments described in the following steps must be made before attempting burner adjustments or use
of the cooktop.
WARNING – This conversion kit shall be installed by a qualified service agency in accordance with the manufacturer’s instructions and all applicable codes and requirements of the authority having jurisdiction. If the information in these instructions
is not followed exactly, a fire, explosion or production of carbon monoxide may result, causing property damage, personal injury or loss of life. The qualified service agency is responsible for the proper installation of this kit. The installation is not proper and complete until the operation of the converted appliance is checked as specified in the manufacturer’s instructions supplied with the kit.
TOOLS YOU WILL NEED
Adjustable wrench |
|
|
|
9/32″ (7 mm) Nutdriver | T15 Torx driver | ||
|
|
|
|
Small,
PARTS INCLUDED WITH COOKTOP
PART | QUANTITY | ||
|
| Brass orifices | 4 |
|
|
|
|
1
Installation instructions
1
1 | |
Printed in the United States |