GE JP970 Cleaning the glass cooktop, Consumer Support Troubleshooting Tips, Burned-On Residue

Page 12

Cleaning the glass cooktop.

Clean your cooktop after each spill. Use CERAMA BRYTE® Ceramic Cooktop Cleaner.

Normal Daily Use Cleaning

ONLY use CERAMA BRYTE® Ceramic Cooktop Cleaner on the glass cooktop. Other creams may not be as effective.

To maintain and protect the surface of your glass cooktop, follow these steps:

Before using the cooktop for the first time, clean it with CERAMA BRYTE® Ceramic Cooktop Cleaner. This helps protect the top and makes cleanup easier.

Daily use of CERAMA BRYTE® Ceramic Cooktop Cleaner will help keep the cooktop looking new.

Shake the cleaning cream well. Apply a few drops of CERAMA BRYTE® Ceramic Cooktop Cleaner directly to the cooktop.

Use a paper towel or CERAMA BRYTE® Cleaning Pad for Ceramic Cooktops to clean the entire cooktop surface.

Use a dry cloth or paper towel to remove all cleaning residue. No need to rinse.

NOTE: It is very important that you DO NOT heat the cooktop until it has been cleaned thoroughly.

Care and Cleaning Operating Instructions Safety Instructions

Use a CERAMA BRYTE® Cleaning Pad for Ceramic Cooktops.

Burned-On Residue

WARNING: DAMAGE to your glass surface may occur if you use scrub pads other than the pad included with your cooktop.

Allow the cooktop to cool.

Spread a few drops of CERAMA BRYTE® Ceramic Cooktop Cleaner on the entire burned residue area.

Using the included CERAMA BRYTE® Cleaning Pad for Ceramic Cooktops, rub the residue area, applying pressure as needed.

If any residue remains, repeat the steps listed above as needed.

For additional protection, after all residue has been removed, polish the entire surface with CERAMA BRYTE® Ceramic Cooktop Cleaner and a paper towel.

Consumer Support Troubleshooting Tips

The CERAMA BRYTE® Ceramic Cooktop Scraper and all recommended supplies are available through our Parts Center. See instructions under “To Order Parts” section on next page.

NOTE: Do not use a dull or nicked blade.

Heavy, Burned-On Residue

Allow the cooktop to cool.

Use a single-edge razor blade scraper at approximately a 45° angle against the glass surface and scrape the soil. It will be necessary to apply pressure to the razor scraper in order to remove the residue.

After scraping with the razor scraper, spread a few drops of CERAMA BRYTE® Ceramic Cooktop Cleaner on the entire burned residue area. Use the CERAMA BRYTE® Cleaning Pad to remove any remaining residue.

For additional protection, after all residue has been removed, polish the entire surface with CERAMA BRYTE® Ceramic Cooktop Cleaner and a paper towel.

12

Image 12
Contents Cooktop 49-80277 12-04 JRSafety Precautions Cook Meat and Poultry THOROUGHLY… SupportRadiant Surface Elements Consumer SupportFeatures of your cooktop Explained onJP910 JP930 Using the surface elements SafetyHow to Set It comes on when the element is hot to the touchConsumer Support Troubleshooting Surface Elements Cycle On and OffControl Lock-Out Care and Cleaning Selecting types of cookwareUsing a pressure canner, InstructionsObserve the Following Points in Canning Care and cleaning of the cooktop How to Remove Protective Shipping Film and Packaging TapeControl knobs may be removed for easier cleaning Control KnobsCleaning the glass cooktop Consumer Support Troubleshooting TipsNormal Daily Use Cleaning Burned-On ResidueTroubleshooting Tips Consumer Support Metal Marks and ScratchesDamage from Sugary Spills and Melted Plastic To Order PartsBefore you call for service… Troubleshooting TipsSafety Instructions Safety Instructions We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration GE Electric Cooktop Warranty GE Will ReplaceWhat GE Will Not Cover Schedule Service Parts and AccessoriesConsumer Support GE Appliances Website Real Life Design Studio
Related manuals
Manual 8 pages 61.91 Kb