Remoting the Grin Module
When removing the parts of the grill modde to clean, be sure dl switches are in the O= position and the module is cool. Remove the grill grate and then slide the heating element toward the renter of the eooktop untfl it is unplugged, Remove the refleetor pan. Empty grease collector jar when mol. Be sure to replaee the jar.
How to Set The Griti Controls
The control bob must be pushed in to turn; this prevents the heating element from being turned on accidentally. Push the knob in ody when it is in the 0~ position. When the knob is in any other position, it can be turned without pushing it in.
Front and rear sections of the grill heating element are controlled separately. Heat ody half the grill surfaw for cookings~ portions or set each hdf at
a different temperature for cooking different types of foods.
Push in the mntrol knob depending on which side of the eooktop grill module is used. The right front and right rear control knobs control the grill when the module is on the right side (on some models). The left front and left rear control knobs operate the grill when the @ module is on the left side of the moktop.
—Automatic Blower Operation
The blower comes on automatidly when the grill is turned on and turns off automatiea~y when the grill is turned off.
What to Do if a Flame-Up Occurs.
Grilling fat or juicy foods may cause
TO CONTROL ~-WS
Turn down the heat setting to LO rather than 0~. This keeps the downdraft vent blower on. Or, turn the vent to ON, then turn the grill 0~.
Using a
Thew steps should mntrol the flame until it eventually goes out. If it does not, cover the entire@ modde with a cookie sheet or the lid from a large roasting pan. Use a pot holder to remove this later beeause it will be hot.
Never use water on a grease fire. Water will spread the flames.
NO~: It is recommended that you have a dry chemid, foam or Halon type fire extinguisher where you ean easily reach it in case of a rooking fire.
(contimed nmpage)
lQ