Shock Hazard

840146400 ENv00.qxd 1/18/06 3:02 PM Page 2

WARNING

•Do not immerse this appliance in water or other liquid.

•If the plug on this appliance does not fit in your outlet:

-Do not modify the plug.

-Do not use an adaptor.

-Have an electrician replace the obsolete outlet.

IMPORTANT SAFEGUARDS

When using electric appliances, basic safety precautions should always be followed, including the following:

1.Read all instructions.

2.Do not touch hot surfaces. Use handles or knobs. Care must be taken, as burns can occur from touching hot parts or from spilled, hot liquid.

3.To protect against fire, electric shock, and injury to persons do not immerse cord, plug or any part of the percolator in water or other liquid.

4.Close supervision is necessary when any appliance is used by or near children.

5.Unplug from outlet when the percolator is not in use and before cleaning. Allow to cool before putting on or taking off parts and before cleaning the appliance.

6.Percolator must be operated on a flat surface away from the edge of counter to prevent accidental tipping.

7.Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is dropped or damaged in any manner. Call our toll-free customer assistance number for information on examination, repair, or adjustment.

8.The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electrical shock or injury to persons.

9.Do not use outdoors.

10.Do not let cord hang over edge of table or counter or touch hot surfaces, including the stove.

11.Twist-off lid must be securely in place during the perk cycle and when serving coffee. See instructions on page 5 for more information.

12.Scalding may occur if the lid is removed during the brew cycle.

13.Do not place percolator on or near a hot gas or electric burner or in a heated oven.

14.Always attach plug to appliance first, then plug cord into wall

outlet. To disconnect percolator, remove plug from wall outlet, then unplug from percolator.

15.Warning: To reduce the risk of fire or electric shock, do not remove the bottom cover. No user serviceable parts are inside. Repair should be done by authorized service personnel only.

16.Do not use appliance for other than intended use.

SAVE THESE INSTRUCTIONS!

Other Consumer Safety Information

This appliance is intended for household use only.

The length of the cord used on this appliance was selected to reduce the hazards of becoming tangled in, or tripping over a longer cord. If a longer cord is necessary an approved extension cord may be used. The electrical rating of the extension cord must be equal to or greater than the rating of the percolator. Care must be taken to arrange the extension cord so that it will not drape over the countertop or tabletop where it can be pulled on by children or accidentally tripped over.

To avoid an electrical circuit overload, do not use another high wattage appliance on the same circuit with your percolator.

To reduce risk of electrical shock, do not immerse the percolator in water.

106856R, 106856, 840146400 specifications

The GE 840146400, 106856, and 106856R are advanced technology products manufactured by General Electric that are designed for a range of industrial applications. These products are renowned for their robustness, efficiency, and innovative features that cater to numerous sectors including energy, transportation, and manufacturing.

One of the key features of these models is their exceptional durability. They are built to withstand the rigors of demanding environments, making them suitable for applications that require reliable performance under extreme conditions. The materials used in their construction have been selected for their strength and resistance to wear, ensuring longevity and reliability over time.

The GE 840146400 series is particularly noted for its cutting-edge technology. It incorporates advanced sensors and algorithms that facilitate real-time data monitoring and analysis. This enhances operational efficiency and helps industries make informed decisions based on accurate metrics. The integration of smart technologies allows for predictive maintenance, reducing downtime and optimizing performance.

Another characteristic of these models is their energy efficiency. They are designed to consume less power while delivering high-output performance, aligning with the industry's shift towards sustainable practices. This feature not only helps to reduce operational costs but also minimizes the environmental impact, making them an ideal choice for organizations looking to enhance their sustainability efforts.

In addition to their efficiency, the GE 840146400, 106856, and 106856R products are known for their user-friendly interfaces. They come equipped with intuitive controls that allow operators to easily navigate settings and monitor performance metrics. This ease of use is critical in minimizing training time for staff and ensuring seamless operation across various work environments.

Moreover, these models offer versatility in application. They can be utilized across multiple sectors, including renewable energy, where their performance can significantly contribute to energy generation and grid stabilization. Their adaptability makes them a valuable asset in various industrial setups.

In conclusion, the GE 840146400, 106856, and 106856R embody a convergence of durability, technology, energy efficiency, and user-friendliness. These features make them an outstanding choice for industries seeking reliable and efficient solutions in an increasingly competitive landscape. Their distinct characteristics continue to position them as leaders in their respective fields, paving the way for innovation and enhanced productivity.