GE ZBD5700, ZBD5600, ZBD5900 installation instructions Rings Foam Insert

Page 21

ZPF75 Custom Panel Kit

3/4" Thick Custom Door Panel

Step 5

Install Assembled Door onto Dishwasher

Note: One person should hold the door while the other installs screws to prevent the door assembly from falling.

Check to be sure that foam inserts are in place.

Hold the assembled door to dishwasher inner door and slide up against control panel. The control panel has posts that should engage the 2 holes in the top of the metal panel.

Install the original center screws and o-rings.

Note: Center screws and o-rings must be securely fastened to prevent leaks.

2 “O” Rings

Foam

Insert

Foam

Insert

 

Control Panel

Moisture Strip

Post Holes

Step 6

Install

Door

Springs

Install original screws to sides of inner door frame, 3 each side.

The additional weight of the custom panel may require that the heavy door springs be installed.

Test Door Balance

• With one hand under the door, slowly open

Push

the door fully.

Rod

• Open and close the door to check for

Guide

proper balance. Correct door balance should prevent the door from raising by itself from a full open position and prevent the door from falling heavily.

• If the door falls heavily, damage will occur from repeated use.

• Install one or both new springs provided.

Install New Springs:

Close and latch the dishwasher door.

Locate door spring on left side of dish- washer.

Disengage the push rod guide by pushing down on the guide and slowly pulling the guide out of the mounting position.

Carefully release the tension on the spring and remove the push rod guide from the rod.

Remove the spring and replace with the spring that has a yellow marking.

Reassemble the push rod guide into the original position.

Test door balance.

Install right side spring if needed.

21

Image 21
Contents Built-In Dishwashers With Optional Trim Kit Installation InstructionsContents Models Available Product DimensionsDesign Information Advance PlanningOptional Trim Kits Corner installation Parts Supplied Installation InformationTools you Will Need Not Supplied Installation PreparationWater Supply Prepare the OpeningCabinet Preparation & Wiring Power SupplyElectrical Requirements Grounding InstructionsPrepare drain plumbing Waste Tee InstallationInstallation StepToekick Brackets Step Install Water Inlet Fittings Step Connect Water Line Step Level Dishwasher Slide Into OpeningDrain Line Installation Step Install Drain LineVerify that power is turned off at the source Step Connect ElectricalSecure dishwasher to adjacent cabinets Secure dishwasher to countertopStep Install Side Trim Step Install Toekick AssemblyKit Contents Cut 1/4 Thick Custom Panel to Size Surface Step Install Door Springs Install New SpringsTest Door Balance Step Determine Custom Panel Sizes Kit ContentsStep Install Door Center Bracket Step Remove Existing Metal DoorStep Assemble Custom Panel Rings Foam Insert Step Install Custom Toekick Stainless Steel Interior Dishwasher Monogram
Related manuals
Manual 28 pages 23.91 Kb

ZBD5900, ZBD5600, ZBD5700 specifications

The GE ZBD5700, ZBD5600, and ZBD5900 are a trio of state-of-the-art dishwashers that exemplify the cutting-edge technology and innovative design that GE is known for. These models cater to diverse user needs while providing efficient cleaning solutions for modern kitchens.

The GE ZBD5700 stands out with its impressive capacity and advanced cleaning technologies. Equipped with a powerful wash system, this model ensures optimal water pressure and distribution, allowing for a thorough clean even on heavily soiled dishes. One of its key features is the SmartDispense Technology, which automatically dispenses the right amount of detergent based on load size and soil level. This not only enhances cleaning efficiency but also conserves detergent, making it a more eco-friendly option.

In addition, this model includes the exclusive Piranhaâ„¢ hard food disposer, which pulverizes food particles, preventing clogging and ensuring that every cycle maintains optimal cleaning performance. Furthermore, the ZBD5700 features multiple wash cycles and options, including a quick wash for lightly soiled dishes and a robust high-heat sanitize option that eliminates bacteria.

Moving to the GE ZBD5600, this dishwasher is designed with user convenience in mind. Its adjustable upper rack easily accommodates tall items, while its folding tines can be manipulated to create the necessary space in both the upper and lower racks. Infused with the latest in quiet operation technology, the ZBD5600 impressively operates at a low decibel level, making it perfect for open-concept living spaces.

The ZBD5900 offers the best of both worlds, combining sophisticated aesthetics with high-performance functionality. Its sleek design features a stainless-steel finish that not only looks elegant but is also fingerprint resistant. This model showcases advanced Dry Boost technology, which provides superior drying performance, ensuring your dishes come out spotless and ready to use.

All three dishwashers are Energy Star certified, affirming their commitment to energy efficiency. This translates to reduced utility bills and a lower environmental footprint, giving consumers peace of mind with their purchase.

In summary, the GE ZBD5700, ZBD5600, and ZBD5900 represent a significant leap forward in dishwasher technology, combining impeccable cleaning abilities with design and energy efficiency. Each model offers unique features, ensuring that there is a perfect fit for every household.