GE ZBD5600, ZBD5700, ZBD5900 installation instructions Step, Toekick Brackets, Installation

Page 10

Install Custom Door Panel

Step 1

Remove wood base

Step 2

Install leveling legs

&toekick

brackets

Installation

Stainless Steel Interior Dishwasher

If you intend to install custom door panels, refer to installation instructions provided in this booklet. The panels should be in place before installing the dishwasher.

Cut the shipping carton and use it as a pad under the dishwasher. This will protect the finished floor in the kitchen.

Lay the dishwasher on its back.

Remove the 4 screws holding the dish- washer to the wood base. Discard screws.

Retain wood base.

Insure that the floor of the cutout is the same level or higher than the rest of the room. If the kitchen floor is tile, it may be elevated above the floor of the installation cutout. Pieces of the wood base may be

placed into the cutout floor to make it level

 

22-7/16"

 

or higher than with the kitchen floor. This

 

 

 

 

 

will allow for easy removal for any future

 

 

 

service.

 

 

 

Un-wrap the drain hose and pull to the rear of the dishwasher. Take care not to kink or crush the hose.

• Install toekick support brackets on the left and right sides of the mounting brackets using 2 screws each. See illustration for correct orientation.

Install the front leveling legs provided in the parts package. The legs should be at least 2” from the bottom edge of the mounting bracket.

Adjust leveling legs to installation height. Tighten leveling leg locking nuts on the

rear.

2" Min.

Screw C

Mounting Bracket

 

Toekick Support Bracket

10

Image 10
Contents With Optional Trim Kit Installation Instructions Built-In DishwashersContents Design Information Product DimensionsModels Available Advance PlanningOptional Trim Kits Corner installation Installation Information Parts SuppliedInstallation Preparation Tools you Will Need Not SuppliedPrepare the Opening Water SupplyElectrical Requirements Power SupplyCabinet Preparation & Wiring Grounding InstructionsWaste Tee Installation Prepare drain plumbingStep InstallationToekick Brackets Step Install Water Inlet Fittings Step Level Dishwasher Slide Into Opening Step Connect Water LineVerify that power is turned off at the source Step Install Drain LineDrain Line Installation Step Connect ElectricalSecure dishwasher to countertop Secure dishwasher to adjacent cabinetsStep Install Toekick Assembly Step Install Side TrimKit Contents Cut 1/4 Thick Custom Panel to Size Surface Install New Springs Step Install Door SpringsTest Door Balance Kit Contents Step Determine Custom Panel SizesStep Remove Existing Metal Door Step Install Door Center BracketStep Assemble Custom Panel Rings Foam Insert Step Install Custom Toekick Stainless Steel Interior Dishwasher Monogram
Related manuals
Manual 28 pages 23.91 Kb

ZBD5900, ZBD5600, ZBD5700 specifications

The GE ZBD5700, ZBD5600, and ZBD5900 are a trio of state-of-the-art dishwashers that exemplify the cutting-edge technology and innovative design that GE is known for. These models cater to diverse user needs while providing efficient cleaning solutions for modern kitchens.

The GE ZBD5700 stands out with its impressive capacity and advanced cleaning technologies. Equipped with a powerful wash system, this model ensures optimal water pressure and distribution, allowing for a thorough clean even on heavily soiled dishes. One of its key features is the SmartDispense Technology, which automatically dispenses the right amount of detergent based on load size and soil level. This not only enhances cleaning efficiency but also conserves detergent, making it a more eco-friendly option.

In addition, this model includes the exclusive Piranhaâ„¢ hard food disposer, which pulverizes food particles, preventing clogging and ensuring that every cycle maintains optimal cleaning performance. Furthermore, the ZBD5700 features multiple wash cycles and options, including a quick wash for lightly soiled dishes and a robust high-heat sanitize option that eliminates bacteria.

Moving to the GE ZBD5600, this dishwasher is designed with user convenience in mind. Its adjustable upper rack easily accommodates tall items, while its folding tines can be manipulated to create the necessary space in both the upper and lower racks. Infused with the latest in quiet operation technology, the ZBD5600 impressively operates at a low decibel level, making it perfect for open-concept living spaces.

The ZBD5900 offers the best of both worlds, combining sophisticated aesthetics with high-performance functionality. Its sleek design features a stainless-steel finish that not only looks elegant but is also fingerprint resistant. This model showcases advanced Dry Boost technology, which provides superior drying performance, ensuring your dishes come out spotless and ready to use.

All three dishwashers are Energy Star certified, affirming their commitment to energy efficiency. This translates to reduced utility bills and a lower environmental footprint, giving consumers peace of mind with their purchase.

In summary, the GE ZBD5700, ZBD5600, and ZBD5900 represent a significant leap forward in dishwasher technology, combining impeccable cleaning abilities with design and energy efficiency. Each model offers unique features, ensuring that there is a perfect fit for every household.