Connect Power Supply, Pretest Check List

Installation Instructions

STEP 16 CONNECT POWER SUPPLY

Skip this step if dishwasher is equipped with power cord. Verify that power is turned off at the source.

If a power cord with plug is used, proceed to Step 16.

•Locate the junction box cover within the user bag.

•Secure house wiring to the back of the junction box with a strain relief.

•Locate the three dishwasher wires, (white, black and green) with stripped ends. Insert dishwasher wires through the small hole in the junction box. Use wire nuts to connect incoming ground to green, white to white and black to black.

•Install the junction box cover. Check to be sure that wires are not pinched under the cover.

� �

��

STEP 17 PRETEST CHECK LIST

Review this list after installing your dishwasher to

avoid charges for a service call that is not covered by your warranty.

■ Check to be sure power is OFF.

■ Open door and remove all foam and paper packaging.

■ Locate the Owner’s Manual in the user bag.

■ Read the Owner’s Manual for operating instructions.

■ Check door opening and closing. If door does not open and

close freely, check for proper routing of spring cable over

pulley. See Step 2, Figure H. If door drops or closes when

released, adjust spring tension.

■ Check to be sure that wiring is secure under the dishwasher,

not pinched or in contact with door springs or other

components. See Steps 9 and 10.

■ Check door alignment with tub. If door hits tub, level

dishwasher. See Step 12.

■ Pull lower rack out, about halfway. Check to be sure it does

not roll back or forward on the door. If the rack moves,

adjust leveling legs. See Step 12.

■ Check door alignment with cabinet. If door hits cabinet,

reposition or relevel dishwasher. See Steps 11, 12 and 13.

Figure KK

��

■ Check that door spring does not contact water line, fill hose,

wiring or other components. See Step 14.

WARNING

If house wiring is not 2-wire with ground, a ground must be provided by the installer. When house wiring is aluminum, be sure to use UL Listed anti-oxidant compound and aluminum- to-copper connectors

■ Verify water supply and drain lines are not kinked or in

contact with other components. Contact with motor or

dishwasher frame could cause noise. See Steps 7 and 9 .

■ Turn on the sink hot water faucet and verify water

temperature. Incoming water temperature must

be between 120°F and 150°F. A minimum of 120°F

temperature is required for best wash performance. See

“Prepare Hot Water Line,” page 5.

■ Add 2 quarts of water to the bottom of the dishwasher to

lubricate the pump seal.

■ Turn on water supply. Check for leaks. Tighten connections

if needed.

■ Remove protective film if present from the control panel

and door.

■ Avoid service call charges by ensuring there is an air gap

or drain hose routed through the required 32" minimum

height.

PDW8200 Series PDW9200 Series PDW8400 Series PDW9700 Series* PDW8700 Series PDW9800 Series PDW8800 Series PDW9900 Series PDW8900 Series CDW9000 Series PDW9700 Series specifications

The GE PDW Series represents a notable advancement in the field of dishwashing technology, offering a range of models that cater to diverse needs and preferences in both residential and commercial settings. The key models within this range, including the PDW8200, PDW8400, PDW8700, PDW8800, PDW8900, PDW9200, PDW9700, PDW9800, and CDW9000 Series, showcase a blend of innovation, efficiency, and performance.

One of the standout features across these models is the advanced wash system. The high-efficiency wash arms and customizable wash cycles ensure that dishes are cleaned thoroughly, regardless of the load size or type of soil. Users can choose from multiple wash options, including heavy-duty cycles for baked-on messes and quick-wash settings for lightly soiled items, optimizing water and energy usage.

Incorporating cutting-edge technologies, these dishwashers are equipped with smart sensors that adapt the wash cycle based on load size and soil conditions. This not only improves cleaning performance but also minimizes water and energy consumption, making them an eco-friendly choice. The QuietWash technology found in many models reduces operational noise, ensuring that users can maintain a peaceful home environment while the dishwasher runs.

Furthermore, the PDW series features a flexible interior design that includes adjustable racks and fold-down tines, allowing for maximum loading capacity and versatility. Users can customize the interior space to accommodate larger dishes, pots, and pans, enhancing convenience and usability.

Safety is also paramount in the design of these dishwashers. With features like child locks and leak detection systems, users can feel secure knowing that their appliance is built with their family's safety in mind.

Energy efficiency is a highlight of the GE PDW series, with many models meeting Energy Star criteria. This not only translates to lower utility bills but also supports environmentally conscious consumers who aim to reduce their carbon footprint.

Overall, the GE PDW8200, PDW8400, PDW8700, PDW8800, PDW8900, PDW9200, PDW9700, PDW9800, PDW9900, and CDW9000 Series dishwasher models epitomize reliability and effectiveness. They appeal to those who value high performance in cleaning, innovative technology for ease of use, and sustainable practices for resource consumption, thus standing out in today’s competitive appliance market.