About the dishwasher control panel | ge.com | |
|
|
|
You can locate your model number on the left tub wall just inside the door. Throughout this manual, features and appearance may vary from your model.
Control Settings
Cycles
CYCLES are selected using a combination of timer dial setting and pad selection. An indicator above the selected pad will be ON to indicate which pad has been selected.
POTS & PANS For heavily soiled dishes or cookware with
NORMAL/ | For loads of everyday dishes, glasses and cookware with medium soils. NOTE: Many dishes have lighter |
NORMAL WASH | soil than normal. |
|
|
LIGHT WASH | For dishes with light soils. NOTE: Pad must be set to NORMAL WASH. |
|
|
RINSE ONLY | For rinsing partial loads that will be washed later. Do not use detergent. |
|
|
DRYING | For warming clean dishes and serving plates. This cycle will take approximately 30 minutes. |
PLATE WARMER |
|
|
|
HOT START | Preheats wash water to improve wash performance. |
Options
An indicator above the selected pad will be ON to indicate which pad has been selected.
RESET OPTION Shuts off the drying heat option. Dishes air dry naturally and energy is saved. Open the dishwasher door to speed drying.
HEATED DRY Turns the heater on for fast drying. This cycle will extend the time to your wash cycle by 30 minutes. ON DO NOT use with RINSE ONLY cycle.
Cycle Chart
Cycle | Water Usage (gal.) | Cycle Time (min.) | |
|
|
|
|
Hot Start Option | 2.5 | 12 |
|
Pots & Pans | 7.0 | 118 |
|
Normal Wash | 5.7 | 118 |
|
Light Wash | 4.5 | 114 |
|
Rinse Only | 2.2 | 53 |
|
Plate Warmer | 0.0 | 40 |
|
|
|
|
|
5
Safety Instructions
Operating Instructions