GE DH2000 operation manual Wall

Page 11

Installation

Converting Straight-through Operation to Corner Operation

To convert track guides and door-lift for corner operation:

1.Remove the rack guide (A); save the fasteners.

Move (A) and re-attach as shown in the illustration at right.

2.Slide a dish rack through the machine to check the guide to dish rack clearance. The dish rack should move smoothly without binding or tipping on the guides.

3.Disconnect the door-lift bracket (B) connecting the front door and the wall-side door and discard. To seal the holes, Re-install the bolts and lockwashers that held the bracket.

4.Disconnect the door linkage arm (C) from the wall-side door and discard. Re-install the white roller (D) and hardware.

5.Disconnect the door linkage arm (C) from the other door but do not discard.

6.Lift the door handle up and back until the springs relax.

7.Adjust the door spring hooks (E) located at the rear of dishwasher to reduce door spring tension until the front and side doors open and close without binding.

Remove the door-lift bracket connecting the front and wall-side doors.

B

wall

A

wall

C

D

Remove the door-linkage arm from the wall-side door and discard.

Re-install the white roller with existing hardware.

A

Re-adjust the door springs at the rear of the dishwasher then check that the doors open and close without binding.

E

3

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Model 2000 Series Manual P/N 114614 rev. JNational Service Department Register Your Product Online Model Serial # Product Registration By FAXRevision History Limited Warranty Table of Contents Model Description Installation Receiving Converting Straight-through Operation to Corner Operation Wall Electrical Connections Three Phase Operation1PH Drain Connection Hot Water ConnectionChemical Dispenser Provisions Vent Fan ControlInstallation Check List Normal Operation Mode Final Rinse Pressure 150F/66C Wash Temperature 180-195F 82-91CFinal Rinse Temperature 20-25 PSIAutomatic Drain Cycle Rinse Sentry Operation ModeAfter Each Meal Period or every 8 Hours of Operation CleaningPaper Clip De-liming Weekly Maintenance MaintenanceDaily Maintenance Condition Cause Solution Service Replacement Parts Wash Pump/Motor Assembly Part Description Qty 622 JUMPER, Strip spares used for conversion Control Panel Assembly Control Panel Assembly 2815 3324 Wash and Rinse Spray Arm Assemblies Hood and Door Assembly Hood and Door Assembly Track Assemby Track Assembly 24 23 JUMPER, Strip spare for conversrion Dish Racks, Line Strainer, PRV Dish Racks, Line Strainer, PRV Timer Chart Electrical Schematic Timer Chart, Electrical SchematicSeconds Total Cycle Phase

DH2000 specifications

The GE DH2000 is a powerful and versatile gas turbine engine developed by General Electric, renowned for its high efficiency and reliability. As part of GE’s advanced hybrid technology lineup, the DH2000 is designed to cater to various applications, particularly in the power generation and industrial sectors.

One of the primary features of the GE DH2000 is its advanced aerodynamic design. The engine utilizes a high-efficiency compressor system, which enhances overall performance while reducing fuel consumption. This feature is essential in today’s energy-conscious world, where businesses are looking to minimize operational costs while meeting growing energy demands.

The DH2000 incorporates cutting-edge materials and manufacturing techniques, including advanced ceramic matrix composites and single-crystal superalloys. These materials provide excellent thermal resistance, allowing the engine to operate at higher temperatures, which directly contributes to improved efficiency. This design philosophy not only maximizes power output but also extends the lifespan of critical components.

In terms of technology, the GE DH2000 leverages digital solutions for monitoring and optimization. Its integrated control system allows real-time diagnostics and predictive maintenance, which are crucial for minimizing downtime and ensuring smooth operations. This digital capability enhances the engine's responsiveness and adaptability to changing load demands.

Moreover, the DH2000 features a modular design, which simplifies maintenance and repair processes. This modularity ensures shorter turnaround times during maintenance schedules, thus optimizing the overall operational efficiency of the system.

One of the standout characteristics of the GE DH2000 is its environmental performance. The engine is designed to meet stringent emissions regulations, ensuring that it produces minimal environmental impact. The incorporation of advanced combustion technologies reduces nitrogen oxides and carbon monoxide emissions, contributing to a cleaner operational footprint.

Finally, the GE DH2000’s versatility allows it to be utilized in various settings, from combined cycle power plants to industrial applications. With its robust performance, high efficiency, and flexible operation, the DH2000 is poised to meet the challenges of modern energy requirements while paving the way for a sustainable future. In conclusion, the GE DH2000 is a cutting-edge gas turbine engine that embodies innovation and efficiency, making it a preferred choice for industries seeking reliable and environmentally friendly power solutions.
Top Page Image Contents