GE DH2000 operation manual Hot Water Connection, Drain Connection

Page 14

Installation

Hot Water Connection

The hot water connection is located at the lower left-rear side of the dishwasher. A 3/4" line strainer and pressure regulating valve (PRV) were installed at the factory.

1.The size of the incoming hot water line should be 3/4" or larger.

2.The PRV should be adjusted to supply a minimum flowing pressure of 20 PSI/138 kPA during the final rinse. The maximum flowing pressure must not exceed 25 PSI/172 kPa during the final rinse.

3.The temperature of the incoming hot water must maintain a minimum temperature of 140°F/60°C for a 40°F/22°C rise booster or a minimum temperature of 110°F/43°C for a 70°F/39°C rise booster.

4.A manually operated 3/4" or larger shut-off valve should be installed in the incoming line as close to the dishwasher as possible for servicing.

Drain Connection

The drain water connection is a 2" slip-fit hose connection and is located at the center-rear of the machine base. It is a gravity drain.

1.The dishwasher drain is 2" O.D. hose connection.

2.A optional drain water tempering kit is available (consult the factory).

3.Drain water flow is controlled by an automatic electrically operated drain valve.

4.The floor sink and/or drain plumbing must be able to accommodate a maximum drain flow rate of

20 US gpm / 17 Imp gpm / 76 Lpm.

The incoming hot water line is a 3/4" NPT connection.

The drain is a 2" slip-fit hose connection.

NOTE:

Plumbing connections must comply with all national and/or local plumbing and sanitary codes.

6

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Manual P/N 114614 rev. J Model 2000 SeriesNational Service Department Register Your Product Online Product Registration By FAX Model Serial #Revision History Limited Warranty Table of Contents Model Description Installation Receiving Converting Straight-through Operation to Corner Operation Wall Three Phase Operation Electrical Connections1PH Hot Water Connection Drain ConnectionVent Fan Control Chemical Dispenser ProvisionsInstallation Check List Normal Operation Mode 20-25 PSI Wash Temperature 180-195F 82-91CFinal Rinse Temperature Final Rinse Pressure 150F/66CRinse Sentry Operation Mode Automatic Drain CycleCleaning After Each Meal Period or every 8 Hours of OperationPaper Clip De-liming Weekly Maintenance MaintenanceDaily Maintenance Condition Cause Solution Service Replacement Parts Wash Pump/Motor Assembly Part Description Qty 622 JUMPER, Strip spares used for conversion Control Panel Assembly Control Panel Assembly 2815 3324 Wash and Rinse Spray Arm Assemblies Hood and Door Assembly Hood and Door Assembly Track Assemby Track Assembly 24 23 JUMPER, Strip spare for conversrion Dish Racks, Line Strainer, PRV Dish Racks, Line Strainer, PRV Timer Chart, Electrical Schematic Timer Chart Electrical SchematicSeconds Total Cycle Phase

DH2000 specifications

The GE DH2000 is a powerful and versatile gas turbine engine developed by General Electric, renowned for its high efficiency and reliability. As part of GE’s advanced hybrid technology lineup, the DH2000 is designed to cater to various applications, particularly in the power generation and industrial sectors.

One of the primary features of the GE DH2000 is its advanced aerodynamic design. The engine utilizes a high-efficiency compressor system, which enhances overall performance while reducing fuel consumption. This feature is essential in today’s energy-conscious world, where businesses are looking to minimize operational costs while meeting growing energy demands.

The DH2000 incorporates cutting-edge materials and manufacturing techniques, including advanced ceramic matrix composites and single-crystal superalloys. These materials provide excellent thermal resistance, allowing the engine to operate at higher temperatures, which directly contributes to improved efficiency. This design philosophy not only maximizes power output but also extends the lifespan of critical components.

In terms of technology, the GE DH2000 leverages digital solutions for monitoring and optimization. Its integrated control system allows real-time diagnostics and predictive maintenance, which are crucial for minimizing downtime and ensuring smooth operations. This digital capability enhances the engine's responsiveness and adaptability to changing load demands.

Moreover, the DH2000 features a modular design, which simplifies maintenance and repair processes. This modularity ensures shorter turnaround times during maintenance schedules, thus optimizing the overall operational efficiency of the system.

One of the standout characteristics of the GE DH2000 is its environmental performance. The engine is designed to meet stringent emissions regulations, ensuring that it produces minimal environmental impact. The incorporation of advanced combustion technologies reduces nitrogen oxides and carbon monoxide emissions, contributing to a cleaner operational footprint.

Finally, the GE DH2000’s versatility allows it to be utilized in various settings, from combined cycle power plants to industrial applications. With its robust performance, high efficiency, and flexible operation, the DH2000 is poised to meet the challenges of modern energy requirements while paving the way for a sustainable future. In conclusion, the GE DH2000 is a cutting-edge gas turbine engine that embodies innovation and efficiency, making it a preferred choice for industries seeking reliable and environmentally friendly power solutions.
Top Page Image Contents