GE DH2000 operation manual Paper Clip

Page 21

Cleaning and Maintenance

Cleaning

At the End of the Day

1.Perform Steps 1-10 on the previous page.

2.Remove the upper and lower rinse and wash spray arms. The spray arms are interchangeable.

3.Unscrew the upper and lower rinse arm spindles (A). Remove the rinse arm assemblies

4.Clean the final rinse arm nozzles using a small paper clip (B).

5.Remove the rinse arm end plugs (C) if necessary, and flush the rinse arm with clean water.

6.Re-install the rinse arm end plugs if they were removed.

7.Remove the wash spray arms and flush with clean water.

8.DO NOT USE STEEL WOOL TO CLEAN THE INTERIOR OF THE MACHINE.

9.Contact the chemical supplier for de-liming if required (see next page).

10.Wipe the interior and exterior of the machine with a soft cloth and a mild detergent.

DO NOT HOSE THE EXTERIOR OF THE MACHINE WITH WATER.

11.Reassemble the dishwasher and leave the door open to allow overnight drying.

	Paper Clip
	B
End
Plug
C	Rinse Arm Spindle
	A
Wash Spray arm
D

Image 21

Contents Model 2000 Series Manual P/N 114614 rev. JNational Service Department Register Your Product Online Model Serial # Product Registration By FAXRevision History Limited Warranty Table of Contents Model Description Installation Receiving Converting Straight-through Operation to Corner Operation Wall Electrical Connections Three Phase Operation1PH Drain Connection Hot Water ConnectionChemical Dispenser Provisions Vent Fan ControlInstallation Check List Normal Operation Mode Final Rinse Temperature Wash Temperature 180-195F 82-91C20-25 PSI Final Rinse Pressure 150F/66CAutomatic Drain Cycle Rinse Sentry Operation ModeAfter Each Meal Period or every 8 Hours of Operation CleaningPaper Clip De-liming Maintenance Daily MaintenanceWeekly Maintenance Condition Cause Solution Service Replacement Parts Wash Pump/Motor Assembly Part Description Qty 622 JUMPER, Strip spares used for conversion Control Panel Assembly Control Panel Assembly 2815 3324 Wash and Rinse Spray Arm Assemblies Hood and Door Assembly Hood and Door Assembly Track Assemby Track Assembly 24 23 JUMPER, Strip spare for conversrion Dish Racks, Line Strainer, PRV Dish Racks, Line Strainer, PRV Timer Chart Electrical Schematic Timer Chart, Electrical SchematicSeconds Total Cycle Phase

DH2000 specifications

The GE DH2000 is a powerful and versatile gas turbine engine developed by General Electric, renowned for its high efficiency and reliability. As part of GE’s advanced hybrid technology lineup, the DH2000 is designed to cater to various applications, particularly in the power generation and industrial sectors.

One of the primary features of the GE DH2000 is its advanced aerodynamic design. The engine utilizes a high-efficiency compressor system, which enhances overall performance while reducing fuel consumption. This feature is essential in today’s energy-conscious world, where businesses are looking to minimize operational costs while meeting growing energy demands.

The DH2000 incorporates cutting-edge materials and manufacturing techniques, including advanced ceramic matrix composites and single-crystal superalloys. These materials provide excellent thermal resistance, allowing the engine to operate at higher temperatures, which directly contributes to improved efficiency. This design philosophy not only maximizes power output but also extends the lifespan of critical components.

In terms of technology, the GE DH2000 leverages digital solutions for monitoring and optimization. Its integrated control system allows real-time diagnostics and predictive maintenance, which are crucial for minimizing downtime and ensuring smooth operations. This digital capability enhances the engine's responsiveness and adaptability to changing load demands.

Moreover, the DH2000 features a modular design, which simplifies maintenance and repair processes. This modularity ensures shorter turnaround times during maintenance schedules, thus optimizing the overall operational efficiency of the system.

One of the standout characteristics of the GE DH2000 is its environmental performance. The engine is designed to meet stringent emissions regulations, ensuring that it produces minimal environmental impact. The incorporation of advanced combustion technologies reduces nitrogen oxides and carbon monoxide emissions, contributing to a cleaner operational footprint.

Finally, the GE DH2000’s versatility allows it to be utilized in various settings, from combined cycle power plants to industrial applications. With its robust performance, high efficiency, and flexible operation, the DH2000 is poised to meet the challenges of modern energy requirements while paving the way for a sustainable future. In conclusion, the GE DH2000 is a cutting-edge gas turbine engine that embodies innovation and efficiency, making it a preferred choice for industries seeking reliable and environmentally friendly power solutions.