GE Built-In Dishwasher Parts Supplied, Materials YOU will Need, Tools YOU will Need

Installation Preparation

PARTS SUPPLIED:

■ Two #8 Phillips head wood screws, 5/8" long to secure dishwasher to underside of countertop (in literature package).

MATERIALS YOU WILL NEED:

■ Ferrule, compression nut and 90° Elbow (3/8" NPT external thread on one end, opposite end sized to fit water supply)

■ Thread seal tape

■ UL Listed wire nuts (3)

2 Wood Screws

90° Elbow,	Hand	Thread	Wire Nuts (3)
Ferrule and	Shut-Off	Seal Tape
Compression Nut	Valve

Materials For New Installations Only:

■ Air gap for drain hose, if required

■ Waste tee for house plumbing, if applicable ■ Electrical cable or power cord, if applicable ■ Screw type hose clamps

■ Strain relief for electrical connection ■ Hand shut-off valve

■ Water line 3/8" min. copper

■ Coupler for extending drain line, if applicable

Waste Tee	Electrical Cable	Hot Water Line
	(or Power Cord, if applicable)

Air	Screw Type	Strain Relief	Coupler
Gap	Hose Clamps

TOOLS YOU WILL NEED:

■ Phillips head screwdriver ■ 5/16" and 1/4" nutdriver

■ T25 torque driver (PDW__II only) ■ 6" Adjustable wrench

■ Level

■ Carpenters square ■ Measuring tape ■ Safety glasses

■ Flashlight

■ Bucket to catch water when flushing the line ■ Gloves

For New Installations Only:

■ Tubing cutter

■ Drill and appropriate bits

■ Hole saw set

Phillips	1/4" and	Level
Head	5/16" Nutdriver
Screwdriver

T25 Torque	6" Adjustable	Tubing Cutter	Carpenters
Driver	Wrench		Square

Flashlight Safety Glasses Measuring Tape

Gloves Bucket Hole Saw Set Drill and Bits

2