GE WB48X10055 warranty Safety, Care and Cleaning Troubleshooting Tips Consumer Support, Start pad

ge.com

Tones at the End of a Timed Cycle

Safety

At the end of a timed cycle, 3 short beeps will sound followed by one beep every 6 seconds until the CLEAR/OFF pad is touched. This continuous 6 second beep may be canceled.

To cancel the 6 second beep:

Touch the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.

Touch the BROIL HI/LO pad. The display shows CON BEEP (continuous beep). Touch the BROIL HI/LO pad again. The display shows BEEP. (This cancels the one beep

every 6 seconds.)

Touch the START pad.

NOTE: This feature is not available for the lower oven.

Instructions Operating Instructions

12 Hour, 24 Hour or Clock Black-Out

Your control is set to use a 12 hour clock.

If you would prefer to have a 24 hour military time clock or black-out the clock display, follow the steps below.

Touch the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.

Touch the TIMER/CLOCK pad once. The display will show 12 hr. If this is the choice you want touch the

START pad.

Touch the TIMER/CLOCK pad again to change to the 24 hour military time clock. The display will show 24 hr. If this is the choice you want touch the START pad.

Touch the TIMER/CLOCK pad again to black-out the clock display.

The display will show OFF.

If this is the choice you want touch the START pad.

NOTE: If the clock is in the black-out mode you will not be able to use the Delay Start function.

11

Care and Cleaning Troubleshooting Tips Consumer Support