Installation Instructions
17SECURE HOOD
Slide the hood back against the wall. Tighten the mounting screws. Be sure the screw heads are in the narrow neck of the keyhole slot.
Mounting
screw (4)
Keyhole (4)
NOTE: DO NOT PUSH ON FAN BLADE. Pushing on the blade may cause it to interfere with other hood parts.
18CONNECT DUCTWORK TO HOOD (Ducted installations only)
On 7″ round installations, attach the 7″ duct with sheet metal screws through the holes in the alignment ears.
7″ round duct
Attachment ear tabs
Use duct tape to make joints secure and air tight.
Duct tape
19INSTALL LIGHT BULB
NOTE: A light bulb is not shipped with the hood. Obtain one locally. Purchase and install an ordinary
20FOLLOW ELECTRICAL CODE
Complete the electrical wiring according to National Electrical Code and local codes.
NOTE: This hood must be permanently grounded.
Connect house wiring (120 VAC) to hood wiring.
15