Maytag MFD2562VEW Refrigerator Doors and Drawer, Complete the Installation, Style 2-French Doors

Page 5

Style 2

1.Create a service loop (minimum diameter of 2 ft [61 cm]) with the copper tubing. Avoid kinks when coiling the copper tubing.

2.Remove the plastic cap from water valve inlet port. Place a compression nut and sleeve on the copper tubing.

3.Insert the end of the copper tubing into the water valve inlet port. Shape tubing slightly so that the tubing feeds straight into the port to avoid kinks.

4.Slide the compression nut over the sleeve and screw into the water valve inlet port.

A

B

C

D

A. Plastic water tubing

C. Compression nut

B. Sleeve

D. Copper tubing

5.Using an adjustable wrench, hold the nut on the plastic water line to keep it from moving. Then, with a second wrench turn the compression nut on the copper tubing counterclockwise to completely tighten. Do not overtighten.

 

A

 

B

 

C

 

D

 

E

A. Plastic water line

D. Copper tubing

B. Water valve inlet port

E. “P” clamp

C. Compression nut

 

6.Check connection by pulling on copper tubing. Attach copper tubing to refrigerator cabinet with a “P” clamp. Turn on water supply to refrigerator and check for leaks. Correct any leaks.

Complete the Installation

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Plug into a grounded 3 prong outlet.

NOTE: Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced. Allow 3 days to completely fill the ice container.

Refrigerator Door(s) and Drawer

TOOLS NEEDED: ⁵⁄₁₆", ³⁄₈", ¹⁄₄" hex-head socket wrench, a #2 Phillips screwdriver, and a flat-blade screwdriver.

IMPORTANT:

■Your refrigerator may have a standard reversible refrigerator door (Style 1) with either a freezer door or freezer drawer, or French doors (Style 2). Follow the instructions specific to the door style of your model.

■All graphics referenced in the following instructions are included later in this section after “Final Steps.” The graphics shown for the standard door (Style 1) are for a right-hand swing refrigerator (hinges factory installed on the right).

■If you only want to remove and replace the doors, see “Remove Door(s) and Hinges” and “Replace Door(s) and Hinges.”

■Before you begin, turn the refrigerator control OFF, and remove food and adjustable door or utility bins from the doors.

Remove and Replace Refrigerator Door Handles

Style 1–Standard Door

Front Mount Handle

■To remove the handle, remove the screw attaching the trim to the upper end of the handle. Using a flat-blade screw driver wrapped in masking tape, pry the trim piece from the lower end of the handle. Then, remove the screws attaching the handle to the door. See Front Mount graphic 2.

■To replace handle, reverse directions.

Side Mount Handle

■To remove the handle, remove the four screws attaching the handle to the side of the door. See Side Mount graphic 2.

■To replace the handle, align the holes in the handle with the holes in the door. Then, insert a screw in the upper hole at each end of the handle. Next, insert a screw in the lower holes. Tighten the screws. See Side Mount graphic 2.

Style 2–French Doors

Metal Handles

■Using a ³⁄₃₂" Allen wrench, loosen the two setscrews located on the side of each handle. Pull the handle straight out from the door. Make sure you keep the screws for reattaching the handles. See Metal Handle graphic 1.

■To replace the handles, reverse the directions.

Plastic Handles

■To remove the handle, grasp the lower part of the handle firmly, slide the handle up and pull the handle straight out from the door. See Plastic Handle graphic 1.

■To replace the handle, position the handle so that the large holes in the mounting clips are down and align the holes with the door studs. Rotate the handle so that the mounting clips are flat against the door and slide the handle down to engage. See Plastic Handle graphic 1.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Refrigerator User Instructions Refrigerator SafetyClean Before Using Installation InstructionsUnpack the Refrigerator Before You Throw Away Your Old Refrigerator or FreezerElectrical Requirements Location RequirementsWater Supply Requirements Recommended Grounding MethodConnect the Water Supply Style 2-French Doors Complete the InstallationRefrigerator Doors and Drawer Replace Door and Hinges Style 1-Standard Door Remove Door and Hinges Style 1-Standard DoorReverse Door Standard Door optional Remove and Replace Drawer Handle Remove and Replace Freezer DrawerRemove Drawer Front Replace Drawer FrontStyle 1-Standard Door Door Removal Replacement Door Swing Reversal optionalDrawer Front Removal Drawer Front Replacement Style 2-Freezer Drawer Models Adjust the DoorStyle1-Freezer Door Models Style 3-Leveling ScrewRefrigerator USE Using the ControlsOpening and Closing Doors Electronic and Dial ControlsDigital Controls Ice Maker Crisper Humidity ControlWater Filtration System Water DispenserTo Clean Your Refrigerator CleaningRefrigerator Care Changing the Light BulbRefrigerator Operation TroubleshootingIce and Water Temperature and MoistureWater from the dispenser is warm Water Filter CertificationsWater is leaking from the dispenser system Application Guidelines/Water Supply Parameters Product Data SheetsLimited Warranty Maytag Major Appliance WarrantyItems Excluded from Warranty This limited warranty does not coverSeguridad DEL Refrigerador Instrucciones Para EL Usuario DEL RefrigeradorRequisitos de ubicación Instrucciones DE InstalaciónDesempaque el refrigerador Requisitos del suministro de agua Requisitos eléctricosMétodo de conexión a tierra recomendado Presión del aguaConexión a la línea de agua Conecte el suministro de aguaConexión al refrigerador EstiloEstilo 2-Dos puertas Puertas y cajón del refrigeradorComplete la instalación Modelos de congelador con puerta Manijas de plásticoModelos con congelador de cajón Puerta del congelador CarcasaPuerta del refrigerador Cómo quitar y volver a colocar la manija del cajón Cómo quitar y volver a colocar el cajón del congeladorPara quitar el frente del cajón Para volver a colocar el frente del cajónEstilo 1 Puerta estándar Bisagra superiorEstilo 2-Dos puertas Cómo quitar y volver a poner la puerta en su lugarEstilo 2-Modelos con congelador de cajón Cómo ajustar la puertaEstilo 1-Modelos de congelador con puerta Uso de los controles Cómo abrir y cerrar las puertasControles electrónicos y con cuadrante Estilo 3-Tornillo niveladorControles digitales Door Alarm Alarma de la puerta Temp Alarm Alarma de temperaturaReset Filter Reposición del filtro Alarma ALSistema de filtración de agua Fábrica de hieloDespachador de agua Limpieza Cuidado DE SU RefrigeradorCómo cambiar el foco Para limpiar su refrigeradorFuncionamiento del refrigerador Solución DE ProblemasEl refrigerador no funciona Parece que el motor funciona excesivamenteHielo y agua Temperatura y humedadEl hielo tiene mal sabor, mal olor o un color grisáceo Los cubos de hielo son huecos o pequeñosEl despachador de agua no funciona debidamente El agua gotea del sistema del despachadorPautas de aplicación/Parámetros para el suministro de agua Hoja DE Datos DEL ProductoGarantía Limitada DE MaytagExclusiones DE LA Garantía Esta garantía limitada no cubreSécurité DU Réfrigérateur Instructions Dutilisation DU RéfrigérateurDéballage du réfrigérateur Instructions D’INSTALLATIONExigences demplacement Spécifications électriques Méthode recommandée de mise à la terreSpécifications de l’alimentation en eau Pression de leauRaccordement au réfrigérateur Raccordement de la canalisation deauRaccordement à une canalisation d’eau Style 2-Porte à deux battants Achever l’installationPortes et tiroir du réfrigérateur Modèles avec tiroir de congélation Dépose des portes et des charnières Style 1-Porte standardModèles de compartiments de congélation avec porte CaissePorte du compartiment de congélation Réinstallation Porte et charnières Style 1-Porte standardStyle 2-Portes à deux battants Dépose et réinstallation de la poignée du tiroir Retirer et réinstaller le tiroir du congélateurRéinstallation de la façade du tiroir Dépose de la façade du tiroirStyle 1-Porte standard Inversion du sens douverture de la porte facultatifStyle 2-Portes à deux battants Charnières supérieuresStyle 2-Modèles avec tiroir de congélation Ajustement de la porteStyle 1-Modèles de compartiments de congélation avec porte Utilisation DU Réfrigérateur Utilisation des commandesOuverture et fermeture des portes Style 3-Vis de réglage de laplombAjustement des réglages de commande Commandes numériquesAjustement des réglages de commande numérique Désactivation/activation du réfrigérateurDoor Alarm avertisseur de la porte Temp Alarm alarme de dépassement de températureReset Filter réinitialisation du filtre Pour ajuster les points de réglage de températureMachine à glaçons Distributeur d’eau Remplacement du filtre à eauSystème de filtration de leau Distribution d’eauEntretien DU Réfrigérateur Remplacement de l’ampoule d’éclairageNettoyage Nettoyage de votre réfrigérateurFonctionnement du réfrigérateur DépannageLe réfrigérateur ne fonctionne pas Le moteur semble trop tournerGlaçons et eau Température et humiditéLes portes ne ferment pas complètement La température est trop élevéeMauvais goût, odeur ou couleur grise des glaçons Les glaçons sont creux ou petitsLe distributeur deau ne fonctionne pas correctement ’eau coule du système de distributionSystème de filtration d’eau intérieur Feuilles DE Données SUR LE ProduitGarantie Limitée Garantie DE Gros Appareil Ménager MaytagÉléments Exclus DE LA Garantie La présente garantie limitée ne couvre pasEN/FR PN W10208789A W10208790AW10297791

MFD2562VEW specifications

The Maytag MFD2562VEW is a standout appliance designed to meet the needs of modern households, combining innovative technology with robust features. As a part of Maytag's reputation for reliability, this refrigerator is engineered to help keep your food fresh while enhancing your kitchen's aesthetic appeal.

One of the main features of the Maytag MFD2562VEW is its spacious interior. With a generous capacity, this refrigerator offers ample room for all your groceries, allowing for easier organization and access. The adjustable shelves give flexibility in configuring the interior space to accommodate larger items or bulky containers. Additionally, the dedicated crisper drawers provide a controlled environment for fruits and vegetables, keeping them fresh longer.

This model is equipped with Maytag's PowerCold feature, which is designed to chill down the fridge quickly after a door has been opened. This is particularly beneficial after restocking groceries, ensuring that perishable items return to optimal temperatures swiftly.

Energy efficiency is a key characteristic of the MFD2562VEW. It utilizes advanced cooling technology that helps maintain consistent temperatures while minimizing energy consumption. This not only contributes to a lower utility bill but also aligns with environmentally conscious practices, making it a smart choice for eco-friendly consumers.

The exterior of the refrigerator showcases a sleek, stainless-steel finish that resists fingerprints, ensuring it remains looking pristine with minimal maintenance. The easy-to-use electronic controls make temperature adjustments straightforward, and the LED lighting illuminates the interior, providing clear visibility of contents without consuming excessive energy.

Moreover, the MFD2562VEW incorporates Maytag's robust build quality. Featuring heavy-duty drawer tracks and durable materials, this refrigerator is built to withstand the rigors of everyday use. The unit also comes with a manufacturer’s warranty, ensuring peace of mind for purchasers.

In summary, the Maytag MFD2562VEW merges style, efficiency, and durability. With its spacious design, energy-saving technologies, and user-friendly features, it stands as a reliable choice for anyone looking to enhance their kitchen while keeping food fresh and organized.
Top Page Image Contents