Table of Contents | Greenheck Fan 474754 specs

Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Rigging/Placing Equipment. . . . . . . . . 4 Duct Connections. . . . . . . . . . . . . 5

Plumbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Detergent Dispenser. . . . . . . . . . . . 5 Cabinet Assembly. . . . . . . . . . . . . 5

Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Electrostatic Cell Wiring. . . . . . . . . . . 6 Exhaust Fan Motor Wiring. . . . . . . . . . 7 System Control Panel Wiring. . . . . . . . . 7

Initial System Start-Up. . . . . . . . . . . . . . . . . . . . . . . . 7

Manual vs. Auto Operation. . . . . . . . . . 8

Operation.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Washing . . . . . . . . . . . . . . . . . . 9 Reset Mode . . . . . . . . . . . . . . . . 9

Detergent Dispenser . . . . . . . . . . . . 10 Adjustments. . . . . . . . . . . . . . . . 10 Flow Control Valve Adjustment. . . . . . . . 10

Maintenance	10
Maintenance Log	12
Warranty	12

An aluminum mesh pre-filter removes large airborne particles from the incoming airstream prior to reaching the ionizer cell. The permanent electrostatic collector section removes grease and smoke particles from the airstream using a high voltage ionizer cell(s). The ionizer imparts a positive charge on the grease and smoke particles as they pass. These particles are then repelled by positively charged plates and collected on negatively charged plates. Upon completion of each cooking day, a wash sequence is initiated for the self-cleaning function of the electrostatic cell via the remote mounted control panel. The aluminum mesh mist eliminator prevents wash water from entering the safety filter and carbon panel sections of the unit. The safety bag filter is intended to protect the carbon panel section if power is lost to the ionizer collector cell.

NOTE

Power Play is designed to remove sub-micron, airborne particulate generated from cooking processes. This system is NOT INTENDED to eliminate regular hood and ductwork cleaning and service. Improper care and maintenance of this system and associated hoods and ductwork may present a fire hazard.

System Components

NOTE

Grease Grabber™ Power Play System Function

Grease Grabber Power Play is an electrostatic precipitator style air filtration unit, with an additional carbon filter module, designed for two specific functions:

•Remove smoke/grease particles from kitchen exhaust.

•Remove odor molecules from kitchen exhaust.

NOTE

Grease Grabber Power Play must be connected to a listed exhaust hood assembly and must be installed in accordance with local building codes, NFPA 96 and NEC.

NOTE

The unit must be installed with a minimum 18 inch clearance to combustible materials and must be installed as part of a listed duct assembly.

The installation criteria for each of the system components shown below should be considered when selecting a site for install. For further detail on installing the components, refer to the INSTALLATION section on page 4.

Cabinet Assembly

The unit body is shipped on a common mounting rail ready for installation. If the unit was ordered with an exhaust fan, the fan will also be mounted as part of the cabinet assembly. Unless specified at time of order, the cabinet assembly must be mounted indoors and be protected from weather as well as be easily accessible for service personnel. (1) 1½ or 2 inch (depending on unit size) water supply line and (1)

3 inch waste water drain line is required at the unit for the system’s wash function.

Safety Filters & Carbon Panels

Filter and ionizer cell quantities for each stage are based on unit size (see table on page 4). A consistent quantity of filters/ionizer cells are provided for each stage of the unit (pre-filter, ionizer cells, mist eliminator, and safety bag filter). Quantity of carbon panels will vary based upon unit exhaust rate. Install filters and carbon panels only when system is ready for start-up.

Grease Grabber™ Power Play Kitchen Exhaust Pollution Control System 3

474754 specifications

The Greenheck Fan 474754 is an advanced ventilation solution designed for commercial and industrial applications. Known for its powerful performance and energy efficiency, this fan caters to a wide range of air movement needs, making it a preferred choice among engineers and facility managers.

One of the standout features of the Greenheck Fan 474754 is its robust construction. Made with high-quality materials, the fan is designed to withstand demanding environments while minimizing wear and tear. The housing is typically constructed from galvanized steel, resulting in outstanding durability and resistance to corrosion.

Equipped with a direct-drive motor, the fan promises lower maintenance costs and higher energy efficiency compared to traditional belt-driven models. The direct drive system eliminates the need for belts and pulleys, reducing the risk of failure and downtime. Moreover, it allows for a more compact design, making installation simpler and space-saving.

The technology behind the Greenheck Fan 474754 also emphasizes noise reduction. With fully integrated sound attenuation features, this fan operates quietly, making it suitable for environments where noise levels need to be kept to a minimum. This is particularly valuable in commercial spaces like offices, restaurants, and healthcare facilities.

Performance-wise, the Greenheck Fan 474754 is designed to deliver high static pressure capabilities, making it effective for applications that require the movement of air against significant resistance. This characteristic is critical for systems involving long duct runs or high-efficiency filters. The fan's adjustable speed motor further enhances versatility, allowing users to tailor airflow rates to their specific needs.

Furthermore, this model is equipped with advanced control options, allowing for automation and remote monitoring. Compatibility with building management systems means the fan can be integrated into an overall HVAC solution, providing users with enhanced control over their indoor environment.

In summary, the Greenheck Fan 474754 is a high-performance, energy-efficient solution ideal for various ventilation applications. Its durable construction, direct-drive motor, noise reduction capabilities, and advanced control options make it a reliable choice for those looking to optimize their air movement solutions in a range of settings. This makes it an invaluable asset for efficient and effective ventilation management.