Greenheck Fan 452413 Maintenance Daily Maintenance, Weekly Maintenance, Periodic Maintenance

Page 32

Maintenance

Daily Maintenance

1.Wipe grease from exposed metal surfaces on the hood interior using a clean, dry cloth.

2.Visually inspect the filters or cartridges for grease accumulation.

3.Remove grease cup, empty contents, and replace cup.

Weekly Maintenance

1.Remove the grease filters or cartridges and wash in dishwasher or pot sink.

Note: Filters installed over heavy grease producing equipment may require more frequent cleaning. See filter cleaning schedule.

2.Before replacing filters, clean the interior plenum surfaces of any residual grease accumulations.

Periodic Maintenance

1.Painted hood exterior surfaces should be cleaned with a mild detergent solution.

2.Stainless steel hood exterior surfaces should be cleaned with a mild detergent and then polished with a good grade stainless steel polish to preserve the original luster.

Note: Never use abrasive cleaners or chemicals on hood surfaces. Never use chlorine based cleaners or iron wool pads to clean the hood. They may scratch or mar the material. Always rub with the grain of the stainless.

3.To maintain optimum performance of your hood and fan, duct cleaning should be performed as often as the application and code requires.

4.Re-caulk the hoods with an NSF Approved silicone caulk, (GE SCS1009 or its equivalent) as needed.

Condensate Hood Baffle Installation

1.Grasp the baffle with drain holes facing down and lift into the hood. For short hoods with only one baffle it may be necessary to turn the baffle slightly diagonal to fit it past the drain channel.

2.After the baffle clears the drain channel of the hood, turn the baffle so it is lined up with the upper hanger in the hood.

3.Hook the upper channel of the baffle over the upper hanger of the hood and set the lower edge of the baffle into the condensate gutter. Repeat until all baffles are installed in the hood.

4.Center the baffle from side to side in the hood.

CORRECT

UPPER HANGER

CONDENSATE

GUTTER

Fig. 51

INCORRECT

UPPER HANGER

CONDENSATE

GUTTER

Fig. 52

32 Canopy Hood

®

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Installation, Operation and Maintenance Manual Table of Contents Table of Contents Receiving and Handling StorageFiller Panel Installation Instructions InstallationHood Installation Overview Installing U-Channel Strip Hood Hanging HeightDouble Island Style Hoods Continuous Capture Plenum HoodsSupply Electrical ConnectionsDuctwork Exhaust Using the Uni-strut Installing External Supply PlenumsUsing the Supply Plenum Clip Installing the Supply Duct Collar to the Plenum External Supply Plenum Weights, Dimensions, and Supply RatesHanging the Back Supply Plenum Hanging the Hood Air DiffusersInstalling Enclosure Panels Installing End Skirts Installing Backsplash Panels Flat Backsplash PanelHood END Panel Installing Duct Collars Back View of the HoodExhaust Air Balancing Baffles Eabb Checking for BalanceTesting Hood Air Volume Baffle Filter Style Hoods Exhaust Balancing the Kitchen Exhaust SystemRotating Vane Anemometer Supply If Applicable 185 + 187.0 fpm High Velocity Cartridge Filters Exhaust Example282 fpm 423.0 cfm Volume with a rotating vane anemometer as follows 1042 4012 m3/hr Testing Hood Air Volume Short Circuit Hoods Supply Amerex Wiring Plan View PRMAnsul Wiring Plan View EquipmentOverall Wiring Plan View Basic Wiring Diagram Wiring by OthersWiring for Hood Switch Panels Circuit Diagrams OFFMaintenance Daily Maintenance Weekly MaintenancePeriodic Maintenance Condensate Hood Baffle InstallationGrease Grabber Filter Installation Grease Grabber Filter Cleaning Frequent MaintenanceFilter Washing Frequency Guide BestTroubleshooting Problem Cold air can be felt by the cook at the hood Replacement Parts Greenheck Registers Part Number Warranty

452413 specifications

The Greenheck Fan 452413 is a well-known model in the ventilation and air movement industry. Renowned for its durability and high performance, this fan is designed for commercial and industrial applications, ensuring optimal air flow and energy efficiency.

One of the standout features of the Greenheck Fan 452413 is its rugged construction. Made with robust materials that withstand harsh environments, this fan is built to last. Its housing is often constructed from galvanized steel, offering excellent resistance to rust and corrosion. This makes it suitable for various applications, from rooftop installations to indoor ventilations systems.

The fan's motor is another highlight. It typically includes high-efficiency motors that not only enhance performance but also help in reducing energy consumption. The Greenheck Fan 452413 often employs variable speed drives, allowing users to adjust the fan speed according to specific requirements. This flexibility facilitates energy savings and ensures optimal performance, especially in varying load conditions.

Noise reduction technology is also a focal point in the design of the Greenheck Fan 452413. The fan is engineered to operate quietly, which is crucial for environments where noise levels must be minimized, such as in residential areas, hospitals, or schools. The incorporation of innovative blade design reduces turbulence, resulting in lower operational noise without compromising airflow.

Another characteristic of the 452413 model is its ease of maintenance. Designed with user convenience in mind, the fan typically features access panels that allow for straightforward inspections and repairs. This design reduces downtime, ensuring that the ventilation system runs effectively without frequent interruptions.

Furthermore, Greenheck provides extensive customization options. The 452413 can be tailored to meet specific requirements, including size, airflow capacity, and additional features such as controls and accessories. This adaptability makes the fan a preferred choice across different sectors, including hospitality, manufacturing, and healthcare.

In summary, the Greenheck Fan 452413 stands out in the market due to its robust construction, energy-efficient motor technology, noise reduction capabilities, and ease of maintenance. Its versatility in customization further solidifies its position as a reliable solution for various ventilation needs, catering to both performance and efficiency in demanding environments. This fan embodies the quality and innovation that Greenheck is known for, ensuring a top-choice option for those seeking effective air movement solutions.
Top Page Image Contents