Greenheck Fan 452413 Hood Hanging Height, Double Island Style Hoods, Installing U-Channel Strip

Page 6

Hood Hanging Height

The hood hanging height is critical, hanging the hood at the incorrect height may significantly reduce the ability for the hood to function properly and may be in violation of codes. The hood hanging height (typically, 78 in. (198.12 cm) above the finished floor) is given on the UL label located on the inside of the hood on the end panel. The hood must be hung level to operate properly. The grease trough is pitched to drain into the grease container.

Double Island Style Hoods

Before hanging the hoods, please verify the hood marks to make sure the correct hood is hung on the correct side.

A double island hood is created by installing two wall style hoods back to back. Use the installation procedure described on page 5 for single island hoods; install and level both hoods. After leveling, secure the hoods together by tack-welding and/or bolting the rear mounting brackets. Caulk this joint with NSF Approved silicone caulk (GE SCS1009 or its equivalent). The caulk is not provided.

Continuous Capture Plenum Hoods

Remove the support angles on the open end panels. (see

Fig. 3

Fig. 3) Use the installation procedure described on page

 

 

4 for single island hoods; install and level both hoods.

 

 

After leveling, secure the hoods together by tack-welding

 

 

and/or bolting the top angles. Fasten the hoods together

 

 

using u-clips and bolts, (see Fig. 4). Caulk this joint

 

 

with NSF Approved silicone caulk (GE SCS1009 or its

 

 

equivalent). The caulk is not provided.

 

 

 

 

 

 

 

 

HOOD

FRONT

 

HOOD

1.REMOVE SUPPORT ANGLE ON OPEN END PANEL.

2.RAISE ALL HOODS INTO APPROPRIATE LOCATION

AND SUPPORT PER CONSTRUCTION PLANS.

3. FASTEN TOP ANGLES TOGETHER USING 1/4 in. BOLTS & N

4. FASTEN HOODS TOGETHER USING U-CLIPS, 1/4 in. BOLTS

 

& CAP NUTS AS INDICATED.

 

CAULK

 

5. CAULK ALL SEAMS AS NECESSARY.

 

BOLT

ACORN NUT

Fig. 4 U-CLIP

Installing U-Channel Strip

1.After the hood is hung in position and leveled, apply caulk to the inside edge of the double island clip. (Fig. 5)

2.Position and install the clip by tapping into position along clip (friction fit).

3.Caulk edges to seal out grease and allow for ease of cleaning. Caulk with NSF Approved silicone caulk

(GE SCS1009 or its equivalent). The caulk is not provided.

Fig. 5

-1B ITEM

 

A

 

1

 

-

 

 

ITEM

HOOD-1A

 

 

 

T

 

ON

 

FR

HOOD-1B

 

HOOD

 

 

 

 

SILICONE CAULK

 

 

(GE SCS1009)

 

 

DOUBLE ISLAND CLIP

DOUBLE ISLAND CLIP

DETAIL A

6 Canopy Hood

®

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Installation, Operation and Maintenance Manual Table of Contents Table of Contents Receiving and Handling StorageInstallation Hood Installation OverviewFiller Panel Installation Instructions Double Island Style Hoods Installing U-Channel StripHood Hanging Height Continuous Capture Plenum HoodsElectrical Connections Ductwork ExhaustSupply Installing External Supply Plenums Using the Supply Plenum ClipUsing the Uni-strut Installing the Supply Duct Collar to the Plenum External Supply Plenum Weights, Dimensions, and Supply RatesHanging the Back Supply Plenum Hanging the Hood Air DiffusersInstalling Enclosure Panels Installing End Skirts Installing Backsplash Panels Flat Backsplash PanelHood END Panel Installing Duct Collars Back View of the HoodExhaust Air Balancing Baffles Eabb Checking for BalanceTesting Hood Air Volume Baffle Filter Style Hoods Exhaust Balancing the Kitchen Exhaust SystemRotating Vane Anemometer Supply If Applicable 185 + 187.0 fpm High Velocity Cartridge Filters Exhaust Example282 fpm 423.0 cfm Volume with a rotating vane anemometer as follows 1042 4012 m3/hr Testing Hood Air Volume Short Circuit Hoods Supply Amerex Wiring Plan View PRMAnsul Wiring Plan View EquipmentOverall Wiring Plan View Basic Wiring Diagram Wiring by OthersWiring for Hood Switch Panels Circuit Diagrams OFFPeriodic Maintenance Maintenance Daily MaintenanceWeekly Maintenance Condensate Hood Baffle InstallationGrease Grabber Filter Installation Grease Grabber Filter Cleaning Frequent MaintenanceFilter Washing Frequency Guide BestTroubleshooting Problem Cold air can be felt by the cook at the hood Replacement Parts Greenheck Registers Part Number Warranty

452413 specifications

The Greenheck Fan 452413 is a well-known model in the ventilation and air movement industry. Renowned for its durability and high performance, this fan is designed for commercial and industrial applications, ensuring optimal air flow and energy efficiency.

One of the standout features of the Greenheck Fan 452413 is its rugged construction. Made with robust materials that withstand harsh environments, this fan is built to last. Its housing is often constructed from galvanized steel, offering excellent resistance to rust and corrosion. This makes it suitable for various applications, from rooftop installations to indoor ventilations systems.

The fan's motor is another highlight. It typically includes high-efficiency motors that not only enhance performance but also help in reducing energy consumption. The Greenheck Fan 452413 often employs variable speed drives, allowing users to adjust the fan speed according to specific requirements. This flexibility facilitates energy savings and ensures optimal performance, especially in varying load conditions.

Noise reduction technology is also a focal point in the design of the Greenheck Fan 452413. The fan is engineered to operate quietly, which is crucial for environments where noise levels must be minimized, such as in residential areas, hospitals, or schools. The incorporation of innovative blade design reduces turbulence, resulting in lower operational noise without compromising airflow.

Another characteristic of the 452413 model is its ease of maintenance. Designed with user convenience in mind, the fan typically features access panels that allow for straightforward inspections and repairs. This design reduces downtime, ensuring that the ventilation system runs effectively without frequent interruptions.

Furthermore, Greenheck provides extensive customization options. The 452413 can be tailored to meet specific requirements, including size, airflow capacity, and additional features such as controls and accessories. This adaptability makes the fan a preferred choice across different sectors, including hospitality, manufacturing, and healthcare.

In summary, the Greenheck Fan 452413 stands out in the market due to its robust construction, energy-efficient motor technology, noise reduction capabilities, and ease of maintenance. Its versatility in customization further solidifies its position as a reliable solution for various ventilation needs, catering to both performance and efficiency in demanding environments. This fan embodies the quality and innovation that Greenheck is known for, ensuring a top-choice option for those seeking effective air movement solutions.
Top Page Image Contents