Maytag W10249206A Crisper Humidity Control, Style To Turn the Ice Maker On/Off, Remember

Page 10

Crisper Humidity Control

(on some models)

You can control the amount of humidity in the moisture-sealed crisper. Adjust the control to any setting between LOW and HIGH.

LOW (open) for best storage of fruits and vegetables with skins.

HIGH (closed) for best storage of fresh, leafy vegetables.

Ice Maker

Style 1

To Turn the Ice Maker On/Off:

To turn the ice maker ON, simply lower the wire shutoff arm.

To manually turn the ice maker OFF, lift the wire shutoff arm to the OFF (arm up) position and listen for the click.

NOTE: Your ice maker has an automatic shutoff. As ice is made, the ice cubes will fill the ice storage bin and the ice cubes will raise the wire shutoff arm to the OFF (arm up) position. Do not force the wire shutoff arm up or down.

Ice Production Rate:

■The ice maker should produce approximately 8 to 12 batches of ice in a 24-hour period.

■To increase ice production, lower the freezer and refrigerator temperature. See “Using the Controls.” Wait 24 hours between adjustments.

■For maximum ice production (on some models), push the switch to ICE PLUS. The ice maker should produce 16 to 20 batches of ice in a 24-hour period in the Ice Plus mode.

Style 2

To Turn the Ice Maker On/Off:

To turn the ice maker ON, simply lower the wire shutoff arm.

To manually turn the ice maker OFF, lift the wire shutoff arm to the OFF (arm up) position and listen for the click.

NOTE: Your ice maker has an automatic shutoff. As ice is made, the ice cubes will fill the ice storage bin and the ice cubes will raise the wire shutoff arm to the OFF (arm up) position. Do not force the wire shutoff arm up or down.

A B

A. Wire shutoff arm

B. Ice level adjustment arm

Ice Production Rate:

■The ice maker should produce approximately 8 to 12 batches of ice in a 24-hour period with the ice level adjustment arm in the factory set 100% position.

NOTE: Adjust the ice level by slightly pressing in on the ice level adjustment arm, to release it from the wire shutoff arm, and then moving it up or down to the desired setting.

■To decrease the amount of ice produced, move the ice level adjustment arm to the 75% or 50% position.

■For maximum ice production move the ice level adjustment arm to the 100% position.

Remember

■Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced.

■The quality of your ice will be only as good as the quality of the water supplied to your ice maker. Avoid connecting the ice maker to a softened water supply. Water softener chemicals (such as salt) can damage parts of the ice maker and lead to poor quality ice. If a softened water supply cannot be avoided, make sure the water softener is operating properly and is well maintained.

■Do not use anything sharp to break up the ice in the bin. This can cause damage to the ice container and the dispenser mechanism.

■Do not store anything on top of or in the ice maker or ice bin.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Refrigerator Safety Refrigerator User InstructionsUnpack the Refrigerator Installation InstructionsClean Before Using Before You Throw Away Your Old Refrigerator or FreezerElectrical Requirements Location RequirementsRecommended Grounding Method Water Pressure Water Supply RequirementsConnect the Water Supply Reverse Osmosis Water SupplyRefrigerator Doors Refrigerator Door CabinetFreezer Door Contour DoorsDoor Removal Replacement Door Swing Reversal optional Using the Controls Adjust the DoorsRefrigerator USE Style To Turn the Ice Maker On/Off Crisper Humidity ControlIce Maker Ice Production RateRefrigerator Care CleaningTo Clean Your Refrigerator Changing the Light BulbsTroubleshooting Refrigerator OperationTemperature and Moisture AccessoriesIce and Water Items Excluded from Warranty Maytag Major Appliance WarrantyLimited Warranty This limited warranty does not coverPage Instructions Dutilisation DU Réfrigérateur Sécurité DU RéfrigérateurDéballage du réfrigérateur Instructions DinstallationExigences demplacement Retirer les matériaux d’emballageSpécifications de l’alimentation en eau Méthode recommandée de mise à la terreSpécifications électriques Pression de leauRaccordement à une canalisation d’eau Achever l’installationRaccordement de la canalisation deau Raccordement au réfrigérateurInversion de la porte facultatif Portes du réfrigérateurDémontage Portes et charnières Portes standardÉtapes finales Portes à contour Réinstallation Portes et charnièresPorte du compartiment de réfrigération CaisseDémontage et réinstallation de la porte Portes à contour Charnière supérieureAjustement des portes Utilisation des commandesUtilisation DU Réfrigérateur Fermeture des portesMachine à glaçons Ajustement des commandesRéglage de lhumidité dans le bac à légumes Style Mise en marche/arrêt de la machine à glaçonsNettoyage Entretien DU RéfrigérateurNettoyage de votre réfrigérateur Remplacement des ampoules d’éclairage Dépannage Fonctionnement du réfrigérateurTempérature et humidité AccessoiresGlaçons et eau Éléments Exclus DE LA Garantie Garantie DE Gros Appareil Ménager MaytagGarantie Limitée La présente garantie limitée ne couvre pasPage W10249206A SP PN W10249207A Tous droits réservés

W10249207A, W10249206A specifications

Maytag, a trusted name in home appliances, offers a range of high-quality products designed for durability and performance. Among their notable offerings are the Maytag W10249206A and W10249207A, two essential components designed to enhance the functionality of Maytag washers and dryers.

The Maytag W10249206A is a reliable lid lock assembly designed for use with select front-load washing machines. This component is critical for ensuring safe operation, as it prevents the lid from being opened during the wash cycle. The robust construction of the lid lock assembly ensures long-lasting performance, aligning with Maytag’s reputation for durability. Its installation is straightforward, allowing users to replace old or malfunctioning parts with ease, ensuring their washing machines remain operational and effective.

On the other hand, the Maytag W10249207A is a high-performance door lock switch designed for front-load washers. This essential component ensures that the door remains securely locked during operation, providing peace of mind while the machine is running. The W10249207A is engineered with precision, ensuring a tight seal to prevent leaks and maintain efficient washing cycles. Its compatibility with various Maytag washer models makes it a versatile choice for users looking to maintain or repair their appliances.

Both components are equipped with advanced technologies that reflect Maytag’s commitment to innovation. The materials used in their construction are selected for their strength and resistance to wear. This attention to detail extends to the design, which incorporates user-friendly features for easy handling and installation. These parts not only enhance the performance of Maytag machines but also contribute to their energy efficiency, ultimately leading to cost savings for users.

In summary, the Maytag W10249206A and W10249207A represent two vital components in the reliable operation of Maytag washing machines. With their durable construction, ease of installation, and commitment to safety, these products align perfectly with the brand's longstanding dedication to quality and performance. By investing in these components, consumers ensure that their Maytag appliances continue to deliver the exceptional washing results they expect.
Top Page Image Contents