Maytag W10249207A, W10249206A Accessories, Temperature and Moisture, Ice and Water

Page 13

Temperature and Moisture

Temperature is too warm

■New installation? Allow 24 hours following installation for the refrigerator to cool completely.

■Door opened often or left open? Allows warm air to enter refrigerator. Minimize door openings and keep door fully closed.

■Large load of food added? Allow several hours for refrigerator to return to normal temperature.

■Control(s) set correctly for the surrounding conditions? Adjust the control(s) a setting colder. Check temperature in 24 hours. See “Using the Control(s).”

There is interior moisture buildup

NOTE: Some moisture buildup is normal.

■Humid room? Contributes to moisture buildup.

■Door opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep door fully closed.

Ice and Water

The ice maker is not producing ice or not enough ice

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Ice maker turned on? Make sure wire shutoff arm or switch (depending on model) is in the ON position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.

■Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

■Water shutoff valve not fully open? Turn the water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

■Questions remain regarding water pressure? Call a licensed, qualified plumber.

Off-taste, odor or gray color in the ice

■New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.

■Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice.

■Odor transfer from food? Use airtight, moisture proof packaging to store food.

■Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals.

ACCESSORIES

To order stainless steel cleaner, call 1-877-232-6771and ask for the part number listed below or contact your authorized MAYTAG® appliance dealer. In Canada, call 1-800-807-6777.

Stainless Steel Cleaner and Polish:

Order Part #20000008

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Refrigerator User Instructions Refrigerator SafetyClean Before Using Installation InstructionsUnpack the Refrigerator Before You Throw Away Your Old Refrigerator or FreezerElectrical Requirements Location RequirementsRecommended Grounding Method Connect the Water Supply Water Supply RequirementsWater Pressure Reverse Osmosis Water SupplyRefrigerator Doors Freezer Door CabinetRefrigerator Door Contour DoorsDoor Removal Replacement Door Swing Reversal optional Using the Controls Adjust the DoorsRefrigerator USE Ice Maker Crisper Humidity ControlStyle To Turn the Ice Maker On/Off Ice Production RateTo Clean Your Refrigerator CleaningRefrigerator Care Changing the Light BulbsRefrigerator Operation TroubleshootingTemperature and Moisture AccessoriesIce and Water Limited Warranty Maytag Major Appliance WarrantyItems Excluded from Warranty This limited warranty does not coverPage Sécurité DU Réfrigérateur Instructions Dutilisation DU RéfrigérateurExigences demplacement Instructions DinstallationDéballage du réfrigérateur Retirer les matériaux d’emballageSpécifications électriques Méthode recommandée de mise à la terreSpécifications de l’alimentation en eau Pression de leauRaccordement de la canalisation deau Achever l’installationRaccordement à une canalisation d’eau Raccordement au réfrigérateurDémontage Portes et charnières Portes du réfrigérateurInversion de la porte facultatif Portes standardPorte du compartiment de réfrigération Portes à contour Réinstallation Portes et charnièresÉtapes finales CaisseDémontage et réinstallation de la porte Charnière supérieure Portes à contourUtilisation DU Réfrigérateur Utilisation des commandesAjustement des portes Fermeture des portesRéglage de lhumidité dans le bac à légumes Ajustement des commandesMachine à glaçons Style Mise en marche/arrêt de la machine à glaçonsNettoyage Entretien DU RéfrigérateurNettoyage de votre réfrigérateur Remplacement des ampoules d’éclairage Fonctionnement du réfrigérateur DépannageTempérature et humidité AccessoiresGlaçons et eau Garantie Limitée Garantie DE Gros Appareil Ménager MaytagÉléments Exclus DE LA Garantie La présente garantie limitée ne couvre pasPage Tous droits réservés W10249206A SP PN W10249207A

W10249207A, W10249206A specifications

Maytag, a trusted name in home appliances, offers a range of high-quality products designed for durability and performance. Among their notable offerings are the Maytag W10249206A and W10249207A, two essential components designed to enhance the functionality of Maytag washers and dryers.

The Maytag W10249206A is a reliable lid lock assembly designed for use with select front-load washing machines. This component is critical for ensuring safe operation, as it prevents the lid from being opened during the wash cycle. The robust construction of the lid lock assembly ensures long-lasting performance, aligning with Maytag’s reputation for durability. Its installation is straightforward, allowing users to replace old or malfunctioning parts with ease, ensuring their washing machines remain operational and effective.

On the other hand, the Maytag W10249207A is a high-performance door lock switch designed for front-load washers. This essential component ensures that the door remains securely locked during operation, providing peace of mind while the machine is running. The W10249207A is engineered with precision, ensuring a tight seal to prevent leaks and maintain efficient washing cycles. Its compatibility with various Maytag washer models makes it a versatile choice for users looking to maintain or repair their appliances.

Both components are equipped with advanced technologies that reflect Maytag’s commitment to innovation. The materials used in their construction are selected for their strength and resistance to wear. This attention to detail extends to the design, which incorporates user-friendly features for easy handling and installation. These parts not only enhance the performance of Maytag machines but also contribute to their energy efficiency, ultimately leading to cost savings for users.

In summary, the Maytag W10249206A and W10249207A represent two vital components in the reliable operation of Maytag washing machines. With their durable construction, ease of installation, and commitment to safety, these products align perfectly with the brand's longstanding dedication to quality and performance. By investing in these components, consumers ensure that their Maytag appliances continue to deliver the exceptional washing results they expect.
Top Page Image Contents