Maytag W10249206A, W10249207A installation instructions Troubleshooting, Refrigerator Operation

Page 12

TROUBLESHOOTING

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)

to possibly avoid the cost of a service call.

In the U.S.A., www.maytag.com In Canada, www.maytag.ca

Refrigerator Operation

The refrigerator will not operate

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

■Power cord unplugged? Plug into a grounded 3 prong outlet.

■Is outlet working? Plug in a lamp to see if the outlet is working.

■Household fuse blown or circuit breaker tripped? Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

■Control(s) on? Make sure the refrigerator control is on. See “Using the Control(s).”

■New installation? Allow 24 hours following installation for the refrigerator to cool completely.

NOTE: Adjusting the temperature control(s) to coldest setting will not cool the refrigerator more quickly.

The motor seems to run too much

Your new refrigerator may run longer than your old one due to its high-efficiency compressor and fans. The unit may run even longer if the room is warm, a large food load is added, the door is opened often, or if the door has been left open.

The refrigerator seems noisy

Refrigerator noise has been reduced over the years. Due to this reduction, you may hear intermittent noises from your new refrigerator that you did not notice from your old model. Below are listed some normal sounds with explanations.

■Pulsating - fans/compressor adjusting to optimize performance.

■Hissing/Rattling - flow of refrigerant, movement of water lines, or from items placed on top of the refrigerator.

■Popping - contraction/expansion of inside walls, especially during initial cool-down.

■Water running/dripping - may be heard when ice melts during defrosting and water runs into the drain pan.

The door will not close completely

■Door blocked open? Move food packages away from door.

■Bin or shelf in the way? Push bin or shelf back in the correct position.

■Crisper cover in the way? Make sure the crisper cover is fully pushed in, so that the back rests on the supports.

The door is difficult to open

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

■Gaskets dirty or sticky? Clean gaskets and contact surfaces with mild soap and warm water. Rinse and dry with soft cloth.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Refrigerator Safety Refrigerator User InstructionsInstallation Instructions Clean Before UsingUnpack the Refrigerator Before You Throw Away Your Old Refrigerator or FreezerLocation Requirements Electrical RequirementsRecommended Grounding Method Water Supply Requirements Connect the Water SupplyWater Pressure Reverse Osmosis Water SupplyRefrigerator Doors Cabinet Freezer DoorRefrigerator Door Contour DoorsDoor Removal Replacement Door Swing Reversal optional Adjust the Doors Using the ControlsRefrigerator USE Crisper Humidity Control Ice MakerStyle To Turn the Ice Maker On/Off Ice Production RateCleaning To Clean Your RefrigeratorRefrigerator Care Changing the Light BulbsTroubleshooting Refrigerator OperationAccessories Temperature and MoistureIce and Water Maytag Major Appliance Warranty Limited WarrantyItems Excluded from Warranty This limited warranty does not coverPage Instructions Dutilisation DU Réfrigérateur Sécurité DU RéfrigérateurInstructions Dinstallation Exigences demplacementDéballage du réfrigérateur Retirer les matériaux d’emballageMéthode recommandée de mise à la terre Spécifications électriquesSpécifications de l’alimentation en eau Pression de leauAchever l’installation Raccordement de la canalisation deauRaccordement à une canalisation d’eau Raccordement au réfrigérateurPortes du réfrigérateur Démontage Portes et charnièresInversion de la porte facultatif Portes standardPortes à contour Réinstallation Portes et charnières Porte du compartiment de réfrigérationÉtapes finales CaisseDémontage et réinstallation de la porte Portes à contour Charnière supérieureUtilisation des commandes Utilisation DU RéfrigérateurAjustement des portes Fermeture des portesAjustement des commandes Réglage de lhumidité dans le bac à légumesMachine à glaçons Style Mise en marche/arrêt de la machine à glaçonsEntretien DU Réfrigérateur NettoyageNettoyage de votre réfrigérateur Remplacement des ampoules d’éclairage Dépannage Fonctionnement du réfrigérateurAccessoires Température et humiditéGlaçons et eau Garantie DE Gros Appareil Ménager Maytag Garantie LimitéeÉléments Exclus DE LA Garantie La présente garantie limitée ne couvre pasPage W10249206A SP PN W10249207A Tous droits réservés

W10249207A, W10249206A specifications

Maytag, a trusted name in home appliances, offers a range of high-quality products designed for durability and performance. Among their notable offerings are the Maytag W10249206A and W10249207A, two essential components designed to enhance the functionality of Maytag washers and dryers.

The Maytag W10249206A is a reliable lid lock assembly designed for use with select front-load washing machines. This component is critical for ensuring safe operation, as it prevents the lid from being opened during the wash cycle. The robust construction of the lid lock assembly ensures long-lasting performance, aligning with Maytag’s reputation for durability. Its installation is straightforward, allowing users to replace old or malfunctioning parts with ease, ensuring their washing machines remain operational and effective.

On the other hand, the Maytag W10249207A is a high-performance door lock switch designed for front-load washers. This essential component ensures that the door remains securely locked during operation, providing peace of mind while the machine is running. The W10249207A is engineered with precision, ensuring a tight seal to prevent leaks and maintain efficient washing cycles. Its compatibility with various Maytag washer models makes it a versatile choice for users looking to maintain or repair their appliances.

Both components are equipped with advanced technologies that reflect Maytag’s commitment to innovation. The materials used in their construction are selected for their strength and resistance to wear. This attention to detail extends to the design, which incorporates user-friendly features for easy handling and installation. These parts not only enhance the performance of Maytag machines but also contribute to their energy efficiency, ultimately leading to cost savings for users.

In summary, the Maytag W10249206A and W10249207A represent two vital components in the reliable operation of Maytag washing machines. With their durable construction, ease of installation, and commitment to safety, these products align perfectly with the brand's longstanding dedication to quality and performance. By investing in these components, consumers ensure that their Maytag appliances continue to deliver the exceptional washing results they expect.
Top Page Image Contents