Maytag W10249207A, W10249206A installation instructions Refrigerator Doors

Page 5

Connect to Refrigerator

1.Unplug refrigerator or disconnect power.

2.Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten.

3.Use the tube clamp on the back of the refrigerator to secure the tubing to the refrigerator as shown. This will help avoid damage to the tubing when the refrigerator is pushed back against the wall.

4.Turn shutoff valve ON.

5.Check for leaks. Tighten any connections (including connections at the valve) or nuts that leak.

 

A

 

B

 

C

 

D

 

E

A. Tube clamp

D. Compression nut

B. Tube clamp screw

E. Valve inlet

C. Copper tubing

 

6.The ice maker is equipped with a built-in water strainer. If your water conditions require a second water strainer, install it in the ¹⁄₄" (6.35 mm) water line at either tube connection. Obtain a water strainer from your nearest appliance dealer.

Complete the Installation

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Plug into a grounded 3 prong outlet.

NOTE: Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced. Allow 3 days to completely fill ice container.

Refrigerator Doors

TOOLS NEEDED: ⁵⁄₁₆" hex-head socket wrench, #2 Phillips screwdriver, flat-blade screwdriver, ⁵⁄₁₆" open-end wrench, flat 2" putty knife.

IMPORTANT:

■Unplug refrigerator or disconnect power.

■Remove food and any adjustable door or utility bins from doors.

■If you only want to remove and replace the doors, see “Remove Doors and Hinges” and “Replace Doors and Hinges.”

■Depending on your model, you have either standard doors or contour doors. If you are going to reverse the door swing, follow the instructions for the appropriate door style.

■All graphics referenced in the following instructions are included later in this section after “Final Steps.”

Remove Doors and Hinges

⁵⁄₁₆" Hex-head hinge screw

1.Unplug refrigerator or disconnect power.

2.Open refrigerator door and remove base grille from the bottom front of the refrigerator. See Base Grille graphic.

3.Close the refrigerator door and keep both doors closed until you are ready to lift them free from the cabinet.

NOTE: Provide additional support for the doors while the hinges are being moved. Do not depend on the door magnets to hold the doors in place while you are working.

4.Remove the parts for the top hinge as shown in Top Hinge graphic. Lift the freezer door free from the cabinet.

5.Remove the parts for the center hinge as shown in the Center Hinge graphic. Lift the refrigerator door free from the cabinet.

6.Remove the parts for the bottom hinge as shown in the Bottom Hinge graphic.

Reverse Doors (optional)

IMPORTANT: If you want to reverse your doors so that they open in the opposite direction, follow these steps. If you are not reversing the doors, see “Replace Doors and Hinges.”

Standard Doors

Door Stop Screw

Door Hinge Hole Plug

Door Handle Sealing Screw

Cabinet Hinge Hole Plug

Flat-Head Handle Screw

Round-Head Handle Screw

Door Handle Seal Screw Front

Shoulder Handle Screw

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Refrigerator User Instructions Refrigerator SafetyClean Before Using Installation InstructionsUnpack the Refrigerator Before You Throw Away Your Old Refrigerator or FreezerRecommended Grounding Method Location RequirementsElectrical Requirements Connect the Water Supply Water Supply RequirementsWater Pressure Reverse Osmosis Water SupplyRefrigerator Doors Freezer Door CabinetRefrigerator Door Contour DoorsDoor Removal Replacement Door Swing Reversal optional Refrigerator USE Adjust the DoorsUsing the Controls Ice Maker Crisper Humidity ControlStyle To Turn the Ice Maker On/Off Ice Production RateTo Clean Your Refrigerator CleaningRefrigerator Care Changing the Light BulbsRefrigerator Operation TroubleshootingIce and Water AccessoriesTemperature and Moisture Limited Warranty Maytag Major Appliance WarrantyItems Excluded from Warranty This limited warranty does not coverPage Sécurité DU Réfrigérateur Instructions Dutilisation DU RéfrigérateurExigences demplacement Instructions DinstallationDéballage du réfrigérateur Retirer les matériaux d’emballageSpécifications électriques Méthode recommandée de mise à la terreSpécifications de l’alimentation en eau Pression de leauRaccordement de la canalisation deau Achever l’installationRaccordement à une canalisation d’eau Raccordement au réfrigérateurDémontage Portes et charnières Portes du réfrigérateurInversion de la porte facultatif Portes standardPorte du compartiment de réfrigération Portes à contour Réinstallation Portes et charnièresÉtapes finales CaisseDémontage et réinstallation de la porte Charnière supérieure Portes à contourUtilisation DU Réfrigérateur Utilisation des commandesAjustement des portes Fermeture des portesRéglage de lhumidité dans le bac à légumes Ajustement des commandesMachine à glaçons Style Mise en marche/arrêt de la machine à glaçonsNettoyage de votre réfrigérateur Entretien DU RéfrigérateurNettoyage Remplacement des ampoules d’éclairage Fonctionnement du réfrigérateur DépannageGlaçons et eau AccessoiresTempérature et humidité Garantie Limitée Garantie DE Gros Appareil Ménager MaytagÉléments Exclus DE LA Garantie La présente garantie limitée ne couvre pasPage Tous droits réservés W10249206A SP PN W10249207A

W10249207A, W10249206A specifications

Maytag, a trusted name in home appliances, offers a range of high-quality products designed for durability and performance. Among their notable offerings are the Maytag W10249206A and W10249207A, two essential components designed to enhance the functionality of Maytag washers and dryers.

The Maytag W10249206A is a reliable lid lock assembly designed for use with select front-load washing machines. This component is critical for ensuring safe operation, as it prevents the lid from being opened during the wash cycle. The robust construction of the lid lock assembly ensures long-lasting performance, aligning with Maytag’s reputation for durability. Its installation is straightforward, allowing users to replace old or malfunctioning parts with ease, ensuring their washing machines remain operational and effective.

On the other hand, the Maytag W10249207A is a high-performance door lock switch designed for front-load washers. This essential component ensures that the door remains securely locked during operation, providing peace of mind while the machine is running. The W10249207A is engineered with precision, ensuring a tight seal to prevent leaks and maintain efficient washing cycles. Its compatibility with various Maytag washer models makes it a versatile choice for users looking to maintain or repair their appliances.

Both components are equipped with advanced technologies that reflect Maytag’s commitment to innovation. The materials used in their construction are selected for their strength and resistance to wear. This attention to detail extends to the design, which incorporates user-friendly features for easy handling and installation. These parts not only enhance the performance of Maytag machines but also contribute to their energy efficiency, ultimately leading to cost savings for users.

In summary, the Maytag W10249206A and W10249207A represent two vital components in the reliable operation of Maytag washing machines. With their durable construction, ease of installation, and commitment to safety, these products align perfectly with the brand's longstanding dedication to quality and performance. By investing in these components, consumers ensure that their Maytag appliances continue to deliver the exceptional washing results they expect.
Top Page Image Contents