CARE AND CLEANING
Replacing the oven light bulb(s)
Note: oven bulb replacement is not covered by your warranty.
LEFT LAMP (some models only)
1Let the oven cavity and the grill element cool down.
IMPORTANT!
Disconnect the oven from the power supply before continuing.
2Remove the left side rack (and catalytic panel if fitted). See ‘Removing and refitting the side racks (and catalytic panels if installed).
3Press down on the lamp cover and rotate to remove.
IMPORTANT!
Never use screwdrivers or other utensils to remove the lamp cover, as doing so could damage the surrounding enamel. Only use your hands.
4Unscrew and replace the bulb with a new one suitable for high temperatures (300oC) with the following specifications:
5Refit the lamp cover, operating in reverse order. Make sure that it clicks into place.
IMPORTANT!
The notch in the inner edge of the cover must be on the side closer to the back of the oven.
6Refit the left side rack (and the left catalytic panel if fitted).
7Turn the power to the oven back on. If your model has an electronic clock, set the clock.
30