|
|
| Fault codes |
| 27 |
|
|
|
|
| |
Fault Codes | Possible Causes | What to Do |
| ||
|
|
|
|
| |
F1 | Flood switch has been | Turn the water and power supply to the |
| ||
|
| activated. | DishDrawer® off and call your Authorized | ||
|
|
| Service Center. |
| |
US CA
F2 | Motor problem. | Call your Authorized Service Center. |
F3 | Temperature sensor | Ensure water coming in through the inlet |
| failed. | hose is less than 149oF. You may need to |
|
| install a tempering valve on your water |
|
| supply. |
F4 | Faulty temperature | Call your Authorized Service Center. |
| sensor or element |
|
F5 | Lid fault | 1 Turn power supply to DishDrawer off, |
|
| then turn on power supply. Fault may |
|
| reset. |
|
| 2 Call your Authorized Service Center. |
F6 | Lid fault | 1 Turn power supply to DishDrawer off, |
|
| then turn on power supply. Fault may |
|
| reset. |
|
| 2 Call your Authorized Service Center. |
F7 | Lid fault | Call your Authorized Service Center. |
F8 | Electrical problem | 1 Turn power supply to DishDrawer off. |
|
| 2 Call your Authorized Service Center. |
F9 | Electronics | Call your Authorized Service Center. |
| malfunction. |
|