Fisher & Paykel DD124P5, DD224P5 manual Installation, Maintenance

Page 4

US CA

4

Safety and warnings

Important safety precautions

Installation

This DishDrawer® must be installed and located in accordance with the Installation Instructions before it is used. If you did not receive Installation Instruction sheets with your DishDrawer®, you can order them by calling your Authorized Service Agent or from the DCS by Fisher & Paykel website, www.dcsappliances.com.

Installation and service must be performed by a qualified technician.

If the power supply cord is damaged, it must be replaced by a dealer or Authorized Service Center or a similar qualified trades person in order to avoid a hazard.

Ensure the DishDrawer® is secured to adjacent cabinetry using the brackets provided. Failure to do so may result in an unstable product, which may cause damage or injury.

Do not operate this appliance if it is damaged, malfunctioning, partially disassembled or has missing or broken parts, including a damaged power supply cord or plug.

Do not store or use gas, or other flammable vapors and liquids in the vicinity of the DishDrawer®. Connect to a properly rated, protected and sized power supply circuit to avoid electrical overload. Make sure that the power supply cord is located so that it will not be stepped on, tripped over or otherwise subject to damage or stress.

Do not install or store the DishDrawer® where it will be exposed to temperatures below freezing or exposed to weather.

Do not use an extension cord or a portable electrical outlet device (e.g. multi-socket outlet box) to connect the DishDrawer® to the power supply.

This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is installed and grounded

in accordance with all local codes and ordinances. Improper connection of the equipment- grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative if you are in doubt as to whether the appliance is properly grounded.

Maintenance

Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in this User Guide. We recommend that you call an Authorized Service Agent. Keep the floor around your appliance clean and dry to reduce the possibility of slipping. Keep the area around/underneath your appliance free from the accumulation of combustible materials, such as lint, paper, rags and chemicals.

When cleaning the underside of the filter plate, care must be taken on the sharp outer edge to avoid the risk of cut type injuries.

Image 4
Contents DishDrawer Contents Safety and warnings Important safety precautionsInstallation MaintenanceOperational Controls Power failure ChildlockWash program selector Eco button optionalOperation Load dishesStart FinishStandard wash program when to use Wash program chartEco wash program when to use US CA 10 Caring for your dinnerware Vacation timeDishwasher standards test 11 US CA Wash Program Normal Cycle Detergent QuantitiesRinse Agent Recommended Loading PatternUS CA 12 Accessories Drain filter access panelBasket Mega rackCup racks AccessoriesCutlery basket How to load your DishDrawer US CA 14 LoadingLoading 15 US CA How not to load your DishDrawerDetergent dispenser Filling the detergent dispenserDetergent quantities Wash type Wash program Detergent quantitiesHard water situations Soft water situationsRinse agent indicator light Rinse agent dispenserFilling the rinse agent dispenser How much rinse agent to useOption adjustments Rinse Agent settingAuto Power setting End of Wash Program BeepsUS CA 20 Option adjustments AdjustmentMake an SaveUser maintenance instructions Cleaning the surfacesCleaning the drain filter, spray arm Filter plate User maintenance instructionsCleaning the drain filter Cleaning the spray arm and filter plate Troubleshooting Intermittent DishDrawer willNot start DishDrawerHow to recognize a fault code Fault codesHow to attend to a fault code Fault Codes Possible Causes What to Do Fill Fault Service Before you call for service or assistanceWarranty Limited warrantyHow long does this limited warranty last? This warranty does not coverCommercial use No other warranties