Unpacking Your Waste Disposal

Remove the waste disposal from the packing carton, being careful not to misplace any of the pieces. Inside the carton you should find the following: (ILLUSTRATION #2)

1. Sink Drain plug *

2. Sink Frange *

3. Sink Flange Rubber Gasket *

4. Sink Flange Fiber Gasket *

5. Mount Ring *

6. Hinged Clamp *

7. Waste Pipe

8. Flange & Screws

9. Rubber Gasket

10. Hexagon Wrench

ILLUSTRATION #2

If any parts are missing contact your dealer before beginning installation.

REMOVE OLD DISPOSER OR SINK WASTE REDUCER

IF REMOVING AN OLD DISPOSER & INSTALLING A FISHER & PAYKEL WASTE DISPOSAL… Disconnect the drain where it connects to the old disposer’s waste pipe. (ILLUSTRATION #3). Then dismount the disposer from the sink mounting assembly. Finally remove the sink flange from the topside of the sink (ILLUSTRATION #4).

IF REMOVING A SINK WASTE REDUCER

If your sink is equipped with a sink waste reducer instead of a waste disposer, remove the nut or threaded ring holding the waste reducer in place. (ILLUSTRATION #5).

ILLUSTRATION #3

ILLUSTRATION #4

ILLUSTRATION #5

- 4 -