Product Clearances, Cutout depth must be | GE ZISW420DX instruction

ZISW/B420DX

GE Monogram® 42" Built-In Side-by-Side Refrigerator with Dispenser and Water Filter

Dimensions and Installation Information (in inches)

The Installation Space

41"

Case Width 25-3/8

*83-1/2" at Rear

26-7/8"	42"
26-7/8"	Frame to Frame
including
handle

*84" From Floor to Top Frame

*Shipping height. The refrigerator can be adjusted to fit into a cutout that is 83-1/2" min. to

84-1/2” max. height. Note that the top case trim at the front is 1/2" higher and will overlap upper cabinetry or soffit. Use leveling legs and wheels for a maximum 1" height adjustment.

35-1/2" for 36" models

36" Models 12"

41-1/2" for 42" models

42" Models 18"

47-1/2" for 48" models

48" Models 20"

*Finished

Width

84-1/2" max

Electrical

83-1/2" min

Area

Finished

75" From Floor

Opening

to Bottom

24"

of Electrical

Area

Water Supply

3-1/2"

Product Clearances

These refrigerators are equipped with a 2 position door stop. The factory set 130° door swing can be adjusted to 90° if clearance to adjacent cabinets or walls is restricted.

3-1/2"

Water and electrical locations

The opening must be prepared with the electrical and water supply located as shown.

130° Door Swing

13"

19"

90° Door Swing

23-7/8" Behind Frame

28-5/8"

4" Min. to Wall

The cutout depth must be 24".

The refrigerator will project forward, slightly beyond adjacent cabinetry, depending on your installation.

The cutout depth beneath a soffit:

When installed beneath a soffit, the soffit cannot exceed the 24" installation depth shown. The top case trim overlaps the bottom of the soffit.

Additional Specifications

• A 115 volt 60Hz., 15 or 20 amp power supply is required.

An individual properly grounded branch circuit or circuit

Allow minimum clearances for freezer door and fresh food door for a full 130° door swing and to allow for pan removal.

4" minimum clearance is required when door swing is adjusted to 90°. If the 90° door stop position is used, pan access is maintained, but pan removal is restricted.

Installation Information: Before installing, consult installation instructions packed with product, or online at Monogram.com, for current dimensional data.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

breaker is recommended. Install a properly grounded 3-

prong electrical receptacle recessed into the back wall.

Electrical must be located on rear wall as shown.

Note: GFI (ground fault interrupter) is not recommended.

•Water line can enter the opening through the floor or back wall. The water line should be 1/4" O.D. copper tubing or GE SmartConnect™ kit between the cold water line and water connection location, long enough to extend to the front of the refrigerator. Installation of an easily accessible shut off valve in the water line is recommended.

Listed by		As an Energy Star®
		partner, GE has determined
Underwriters
		that this product meets the
Laboratories
		Energy Star guidelines

		for energy efficiency.

Specification Created 3/08

110172

ZISW420DX specifications

The GE ZISW420DX is a state-of-the-art refrigerator designed to meet the needs of modern households, offering a perfect blend of style, performance, and advanced technology. This model features an elegant fingerprint-resistant stainless steel finish that not only adds a touch of sophistication to the kitchen but also simplifies maintenance by minimizing visible smudges.

One of the standout features of the ZISW420DX is its spacious interior, which includes a generous capacity of over 20 cubic feet. This ample space is intelligently designed with adjustable shelving, allowing users to customize the arrangement to accommodate various food items, from large platters to tall bottles. The refrigerator also includes numerous door bins, catering to the organization of condiments, beverages, and snacks.

The cooling technology incorporated in the ZISW420DX boasts an advanced side-by-side design with separate cooling systems for the refrigerator and freezer compartments. This not only ensures optimal temperature management but also helps maintain ideal humidity levels, preserving the freshness of food for longer periods. The model employs GE’s own advanced cooling technology, which provides faster cooling and consistent temperatures throughout the appliance.

Another notable feature is the integrated water and ice dispenser, which delivers both crushed and cubed ice, along with filtered water. This convenience eliminates the need for water bottles and ice trays, making it an eco-friendly choice for families. Additionally, the water filter is designed to be easily replaceable, ensuring that you always have access to clean drinking water.

The ZISW420DX also incorporates smart technology, allowing for remote monitoring and control through a dedicated app. Users can adjust temperature settings, receive maintenance reminders, and even troubleshoot issues from their smartphones, enhancing user experience and convenience.

This refrigerator is designed with energy efficiency in mind, meeting Energy Star standards. This means that it not only consumes less power, which is great for the environment, but it also contributes to lower utility bills for homeowners.

Overall, the GE ZISW420DX combines innovative technology, spacious design, and energy efficiency to cater to the needs of every modern kitchen. With its array of features, it stands out as a practical and stylish choice for anyone looking to elevate their culinary space.