GE r10965v-1 owner manual HOW to Connect Electricity

Page 6

IMPORTANT SAFETY INSTRUCTIONS

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a standard 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The refrigerator should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet.

Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.

When moving the refrigerator away from the wall, be careful not to roll over or damage the power cord.

USE OF ADAPTER PLUGS (Adapter plugs not permitted in Canada)

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an adapter plug.

However, if you must use an adapter, where local codes permit, a temporary connection may be made to a properly grounded 2-prong wall outlet by use of a UL-listed adapter available at most local hardware stores.

The larger slot in the adapter must be aligned with the larger slot in the wall outlet to provide proper polarity in the connection of the power cord.

When disconnecting the power cord from the adapter, always hold the adapter in place with one hand while pulling the power cord plug with the other hand. If this is not done, the adapter ground terminal is very likely to break with repeated use.

If the adapter ground terminal breaks, DO NOT USE the appliance until a proper ground has been established.

Attaching the adapter ground terminal to a wall outlet cover screw does not ground the appliance unless the cover screw is metal, and not insulated, and the wall outlet is grounded through the house wiring. You should have the circuit checked by

a qualified electrician to make sure the outlet is properly grounded.

Use of an adapter plug will increase the clearance needed for the back of the appliance.

USE OF EXTENSION CORDS

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an extension cord.

However, if you must use an extension cord, it is absolutely necessary that it be a UL-listed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 15 amperes (minimum) and 120 volts.

SAVE THESE INSTRUCTIONS

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Side-by-Side Stainless Steel Free-Standing Refrigerators Monogram.comContents Before using your refrigeratorIntroduction If you received a damaged refrigerator Save time & money If you need serviceWrite down the model & serial numbers Consumer Information For customers in CanadaRead and Save These Instructions Before You Throw Away Your Old Refrigerator or FreezerLire ET Conserver CES Instructions HOW to Connect Electricity Raccordement Électrique Temperature controls Performance Air Flow SystemTo turn the cooling system off, tap How to use How it worksCustomCool CustomCool chart Replacement Filters To order additional filter cartridges United States, call GE Parts and AccessoriesWater filter cartridge Slide-out spillproof shelf Large BinsSlide-out freezer shelves QuickSpace shelfFreezer baskets Fixed freezer shelvesRefrigerator doors Door alignmentFruit and vegetable crispers Crispers and PansAutomatic icemaker Special notesMise EN Garde La glace Removing ice binOther dispenser controls Using the dispenserDispenser Light Door Alarm Important facts about the dispenserDispenser drip Cleaning the outsideCleaning the inside Do not use appliance wax or polish on the stainless steelPreparing to move Care and CleaningPreparing for vacation Be sure the refrigerator stays in an uprightCompartment Replacing the Light BulbsFresh food Upper lightProblem Solver Normal operating soundsQuestions? Use this problem solver Problem Solver Problem Possible CauseFrequent Questions? Use this problem solver Food ISN’T Operating Specifications General Installation/Operation/Maintenance RequirementsSpecial Notices Water Treatment Device Certificate Number Stainless Steel Refrigerator In-Home Repair Your Monogram Refrigerator Warranty From Date Original Purchase

r10965v-1 specifications

The GE R10965V-1 is a notable electrical component that exemplifies advanced engineering in the field of electrical applications. This product is primarily recognized for its versatility and reliability, making it ideal for various industrial and commercial applications.

One of the standout features of the GE R10965V-1 is its robust design, which allows it to operate effectively under extreme conditions. Its durable construction ensures longevity, reducing the need for frequent replacements. The unit is built to withstand high temperatures, moisture, and other potentially damaging environmental factors, making it suitable for outdoor and challenging industrial environments.

The GE R10965V-1 incorporates advanced semiconductor technology, which enhances its efficiency and performance. This technology allows for better thermal management, reducing overheating risks and increasing the overall lifespan of the component. Additionally, the device supports a wide range of operating voltages, making it highly adaptable to various electrical systems.

Another significant characteristic of the GE R10965V-1 is its high current capacity. This feature is particularly beneficial for applications requiring substantial power supply, as it ensures that the device can handle increased loads without compromising performance. The internal circuitry is designed to minimize losses, further enhancing its reliability and operational efficiency.

In terms of safety, the GE R10965V-1 employs multiple protective features to prevent short circuits, overloads, and other electrical hazards. These safeguards contribute to overall system stability, making it a preferred choice for engineers and technicians who prioritize safety in their designs.

The installation process for the GE R10965V-1 is user-friendly, with straightforward wiring and mounting options that simplify integration into existing systems. This ease of installation is a considerable advantage for maintenance teams, as it reduces downtime and operational disruptions.

Compatibility is another defining aspect of the GE R10965V-1. It is designed to work seamlessly with a variety of control systems and monitoring tools, facilitating enhanced functionality and performance measurement. Users often appreciate this versatility, as it allows for easier upgrades and system enhancements.

Overall, the GE R10965V-1 stands out in the market due to its combination of durable construction, advanced technology, high current capacity, and safety features. It caters to a broad spectrum of applications and is widely regarded for its reliability and efficiency in delivering electrical power. As industries continue to evolve and demand more robust electrical solutions, the GE R10965V-1 remains a vital component for enabling progress.
Top Page Image Contents