GE r10965v-1 owner manual Temperature controls, Performance Air Flow System

Page 8

Operating Instructions

Stainless Steel Refrigerator

Temperature controls

The temperature controls are preset in the factory at 37°F for the fresh food compartment and 0°F for the freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended settings.

The temperature controls can display both the SET temperature as well as the actual temperature in the fresh food and freezer compartments. The actual temperature may vary slightly from the SET temperature based on usage and operating environment.

Setting either or both controls to OFF stops cooling in both the freezer and fresh food compartments, but does not shut off electrical power to the refrigerator.

NOTE: The refrigerator is shipped with protective film covering the temperature controls. If this film was not removed during installation, remove it now.

To change the temperature, press and release the (warmer) or (colder) pad. The SET light will come on and the display will show the set temperature. To change the temperature, tap either the (warmer) or (colder) pad until the desired temperature is displayed. Fresh food temperatures can be adjusted between 34°F and 44°F and the freezer temperatures can be adjusted between

-6°F and +6°F.

Once the desired temperature has been set, the temperature display will return to the actual fresh food and freezer temperatures after 5 seconds. Several adjustments may be required. Each time you adjust controls, allow 24 hours for the refrigerator to reach the temperature you have set.

To turn the cooling system off, tap the

(warmer) pad for either the fresh food compartment or the freezer until the display shows OFF. To turn the unit back on, press the (colder) pad for either the fresh food compartment or freezer. The SET light will illuminate on the side you selected. Then press the (colder) pad again (on the side where the SET light is illuminated) and it will go to the preset points of 0°F for the freezer and 37°F for the fresh food compartment.

Performance

Air Flow

System

The Performance Air-Flow System is designed to maximize temperature control in the fresh food and freezer compartments. This unique special feature consists of the Air Tower along the top and back walls of the fresh food compartment and the Air Tunnel on the bottom portion of the freezer rear wall. Placing food in front of the louvers on these components will not affect performance.

Although the Air Tower and the Air Tunnel can be removed, doing so will affect temperature performance. (For removal instructions, on-line, 24 hours a day, contact us at www.monogram.com or call 800.444.1845. In Canada, call us at 1.800.561.3344.)

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Side-by-Side Stainless Steel Free-Standing Refrigerators Monogram.comIntroduction ContentsBefore using your refrigerator If you need service Write down the model & serial numbers Consumer InformationIf you received a damaged refrigerator Save time & money For customers in CanadaRead and Save These Instructions Before You Throw Away Your Old Refrigerator or FreezerLire ET Conserver CES Instructions HOW to Connect Electricity Raccordement Électrique To turn the cooling system off, tap Temperature controlsPerformance Air Flow System How to use How it worksCustomCool CustomCool chart Water filter cartridge Replacement Filters To order additional filter cartridgesUnited States, call GE Parts and Accessories Slide-out spillproof shelf Large BinsQuickSpace shelf Freezer basketsSlide-out freezer shelves Fixed freezer shelvesRefrigerator doors Door alignmentFruit and vegetable crispers Crispers and PansAutomatic icemaker Special notesMise EN Garde La glace Removing ice binUsing the dispenser Dispenser Light Door AlarmOther dispenser controls Important facts about the dispenserCleaning the outside Cleaning the insideDispenser drip Do not use appliance wax or polish on the stainless steelCare and Cleaning Preparing for vacationPreparing to move Be sure the refrigerator stays in an uprightReplacing the Light Bulbs Fresh foodCompartment Upper lightProblem Solver Normal operating soundsQuestions? Use this problem solver Problem Solver Problem Possible CauseFrequent Questions? Use this problem solver Food ISN’T Special Notices Operating SpecificationsGeneral Installation/Operation/Maintenance Requirements Water Treatment Device Certificate Number Stainless Steel Refrigerator In-Home Repair Your Monogram Refrigerator Warranty From Date Original Purchase

r10965v-1 specifications

The GE R10965V-1 is a notable electrical component that exemplifies advanced engineering in the field of electrical applications. This product is primarily recognized for its versatility and reliability, making it ideal for various industrial and commercial applications.

One of the standout features of the GE R10965V-1 is its robust design, which allows it to operate effectively under extreme conditions. Its durable construction ensures longevity, reducing the need for frequent replacements. The unit is built to withstand high temperatures, moisture, and other potentially damaging environmental factors, making it suitable for outdoor and challenging industrial environments.

The GE R10965V-1 incorporates advanced semiconductor technology, which enhances its efficiency and performance. This technology allows for better thermal management, reducing overheating risks and increasing the overall lifespan of the component. Additionally, the device supports a wide range of operating voltages, making it highly adaptable to various electrical systems.

Another significant characteristic of the GE R10965V-1 is its high current capacity. This feature is particularly beneficial for applications requiring substantial power supply, as it ensures that the device can handle increased loads without compromising performance. The internal circuitry is designed to minimize losses, further enhancing its reliability and operational efficiency.

In terms of safety, the GE R10965V-1 employs multiple protective features to prevent short circuits, overloads, and other electrical hazards. These safeguards contribute to overall system stability, making it a preferred choice for engineers and technicians who prioritize safety in their designs.

The installation process for the GE R10965V-1 is user-friendly, with straightforward wiring and mounting options that simplify integration into existing systems. This ease of installation is a considerable advantage for maintenance teams, as it reduces downtime and operational disruptions.

Compatibility is another defining aspect of the GE R10965V-1. It is designed to work seamlessly with a variety of control systems and monitoring tools, facilitating enhanced functionality and performance measurement. Users often appreciate this versatility, as it allows for easier upgrades and system enhancements.

Overall, the GE R10965V-1 stands out in the market due to its combination of durable construction, advanced technology, high current capacity, and safety features. It caters to a broad spectrum of applications and is widely regarded for its reliability and efficiency in delivering electrical power. As industries continue to evolve and demand more robust electrical solutions, the GE R10965V-1 remains a vital component for enabling progress.
Top Page Image Contents