Safety Instructions (Continued)
13.Do not place this projector in any of the 14. Do not block the ventilation holes.
following environments. | - Do not place this projector on a blanket, | |
- Space that is poorly ventilated or | bedding or any other soft surface. | |
- Do not cover this projector with a cloth | ||
confined. Allow at least 50 cm clearance | ||
from walls and free flow of air around | or any other item. | |
the projector. | - Do not place inflammables near the | |
- Locations where temperatures may | projector. | |
become excessively high, such as the |
| |
inside of a car with all windows rolled |
| |
up. |
|
- Locations where excessive humidity, dust, or cigarette smoke may contaminate optical components, shorten the projector's life span and darken the image.
| If the ventilation holes are seriously | |
| obstructed, overheating inside the | |
| projector may result in a fire. | |
15. | Always place the projector on a level, | |
| horizontal surface during operation. | |
| - Do not use if tilted at an angle of more | |
- Locations near fire alarms | than 10 degrees left to right, nor at angle | |
- Locations with an ambient temperature | of more than 15 degrees front to back. | |
above 40°C / 104°F | Using the projector when it is not fully | |
- Locations where the altitudes are higher | horizontal may cause a malfunction of, | |
or damage to, the lamp. | ||
than 3000 m (10000 feet). | ||
|
3000 m |
|
(10000 feet) |
|
16. | Do not stand the projector on end |
0 m | vertically. Doing so may cause the |
(0 feet) | projector to fall over, causing injury or |
| resulting in damage to the projector. |
Important safety instructions | 5 |
