System Setup Advanced menu Function Description | BenQ MX761

5. SYSTEM SETUP: Advanced menu

	Function	Description
		Selects a baud rate that is identical with your computer’s so that you can
	Baud Rate	connect the projector using a suitable RS-232 cable and update or
	Baud Rate	download the projector’s firmware. This function is intended for

		qualified service personnel.

	Test Pattern	Selecting On enables the function and the projector displays the grid test
	Test Pattern	pattern. It helps you adjust the image size and focus and check that the
		projected image is free from distortion.

		Closed Caption Enable
		Activates the function by selecting On when the selected input signal
		carries closed captions.
		• Captions: An on-screen display of the dialogue, narration, and
	Closed	sound effects of TV programs and videos that are closed captioned
	Closed	(usually marked as "CC" in TV listings).
	Caption	(usually marked as "CC" in TV listings).
	Caption	Set your screen aspect ratio to 4:3. This function is not available
		when the aspect ratio is “16:9” or “Real”.
		Caption Version
		Selects a preferred closed captioning mode. To view captions, select
		CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary language
		in your area).

		Network
		Selecting On enables the function. The projector is able to provide the
		network function when it is in standby mode.
		Microphone
		Selecting On enables the function. The projector can output the
		microphone signal when it is in standby mode and all the necessary
	Standby	equipment is correctly connected. See "Playing sound through the
	Standby	projector" on page 19 for details.
	Settings	projector" on page 19 for details.
	Settings	Monitor Out
		Monitor Out
		Selecting On enables the function. The projector can output a VGA
		signal when it is in standby mode and the COMPUTER 1 jack is
		correctly connected to devices. See "Connection" on page 17 for how to
		make the connection.
		Enabling this function slightly increases the standby power
		consumption.
		Wired LAN
	Network	Wireless LAN
	Network	Remote Desktop
	Settings	Remote Desktop
	Settings	See "Controlling the projector through a LAN environment" on page 38

		for details.

		Returns all settings to the factory preset values.
	Reset All	The following settings will still remain: Phase, H. Size, User 1, User
	Settings	2, Color Space Conversion, Language, Projector Position, High
		Altitude Mode, Security Settings, Remote Receiver, DHCP, SSID,
		Remote Desktop and Baud Rate.

60 Operation

Image 60

BenQ MX761 System Setup Advanced menu Function Description, Baud Rate, Test Pattern, Closed, Caption, Standby, Network

Contents

Welcome MX760/MX761 Digital Projector Table of contents Important safety instructions Safety InstructionsRefer servicing to qualified service personnel Important safety instructions Safety Instructions Locations near fire alarms Locations with an ambient temperatureLocations where the altitudes are higher Confined. Allow at least 50 cm clearance Installed It from the power supplys power outletServiced Do not step on the projector or place Projector features IntroductionIntroduction Shipping contents Projector exterior view Rear/lower side Power indicator light Focus ringZoom ring Left Remote control TestAuto Keystone/Arrow buttons / Up Down Operating the Laser pointer MuteMIC/VOL + Numeric buttons Remote control effective range Replacing the remote control batteriesApprox.+15º Positioning your projector Choosing a locationFront Table Front Ceiling Projection dimensions Obtaining a preferred projected image size When the projector position is fixed Shifting the projection lens Connection Video cable Hdmi cable Connection Connecting video source devices Connecting audioTerminal name Terminal appearance Best Playing sound through the projector About the microphone inputDevice Page Operation Starting up the projectorOperation Adjusting the projected image Adjusting the projection angleAuto-adjusting the image Fine-tuning the image size and clarity Correcting keystone Using the menus Following example describes how to set the OSD languageUse / to highlight the System Setup Basic menu Using a security cable lock Utilizing the password functionSetting a password Highlight Change Security Settings and press MODE/ENTER If you forget the password Entering the password recall procedureChanging the password Write down the number and turn off your projector Disabling the password function Switching input signal Changing Color Space Magnifying and searching for details Selecting the aspect ratio Projectors native resolution in its Displayed in the center AdjustmentsAbout the aspect ratio Screen with a 169 aspect ratio Using Wall Color Selecting a picture modeSetting the User 1/User 2 mode Go to the Picture Picture Mode menu Fine-tuning the image quality in user modes Press To highlight Saturation and adjust its Every adjustment made will reflect to3D Color Management Range at 0, only pure red in the projected Setting the presentation timer To cancel the timer, perform the following stepsCount Up Increases from 0 to the preset time Count Down Selection Description Utilizing FAQ function Remote paging operationsFreezing the image Hiding the image To activate the High Altitude Mode Using the remote controlLocking control keys Operating in a high altitude environment Adjusting the sound Adjusting the sound levelAdjusting the microphone volume Turning off the Power On/Off Ring Tone Controlling the projector through a LAN environment Cable connectionIf you are in a Dhcp environment If you are in a non-DHCP environment Wireless connection Highlight Wireless LAN and press MODE/ENTER Controlling the projector remotely through a web browser Page Page Iii Operation Page Operation Page Downloading and installing Q Presenter Using Q PresenterDisplaying images through Q Presenter Operation Operation Presenting from a USB Reader Direct power off Once the cooling process finishes, a Power Off RingShutting down the projector Menu operation Menu systemMain menu Sub-menu Options Basic Advanced Advanced Network Description of each menu Picture Mode TemperatureManagement Save Settings Display menu Picture menu Function Description Teaching System Setup Basic menu Function Description Quick Auto TimerSettings Search Settings Security Description Panel KeyBackground Lock System Setup Advanced menu Function Description Reset AllBaud Rate Test Pattern Features Service CurrentSystem Status Maintenance Care of the projector Setting Lamp Mode as Economic Setting Auto Power OffLamp information Getting to know the lamp hour Timing of replacing the lamp Status Message Replacing the lamp Tighten the screw that secures the lamp Connect the power and restart the projector Resetting the lamp timerTighten the screw that secures the lamp cover Indicators Light Status & Description Power eventsLamp events Thermal events Troubleshooting Specifications Projector specifications Dimensions Mm W x 128 mm H x 252 mm DCeiling Mount screw M4 x 8 Max L = 8 mm Unit mm Timing chart Supported timing for PC input Supported timing for Hdmi Hdcp input Supported timing for Component-YPbPrinput Supported timing for Video and S-Video inputsTiming Horizontal Warranty and Copyright information Limited warrantyCopyright Disclaimer Regulation statements FCC statement for United States usersEEC statement for European users Weee directive