Note: | Additional materials may | be necessary for installation in solid surface countertops | |
| Contact | the countertop | manufacturer. |
Parts included | 1. Hold | down brackets |
|
2.Clamping screws, #10d32 x 2 1/2" (63,8 mm) (4)
3.Sheet metal screws, #8 x 3/8" (9,5 mm) (4)
4.Washers (4)
5.Heat shield
Preparation
Countertop requirements
Setback Distance
Flat Area
Flat Area
Flat Area
After preparing cutout, remove shavings as they can affect the function of elect components.
WARNING: To reduce the risk of ignition combustible materials surround the installed cooktop are not permitted.
Solid surface countertops often require special installations. For example, heat reflective tape and rounded corners may be necessary. Contact the countertop manufacturer for instructions specific to your countertop.
5