Cabinet requirements | The | distance from the top of the cooktop to the bottom | of cabinets above | |||
| A = | 30" (762 mm) min. This distance can be reduced to A = 24" (610 |
| |||
| bottom of the wood or metal cabinet | is protected by not | less than 1/4" | (6 | ||
| flame | retardant millboard, covered by no. 28 MSG sheet steel, 0.015" (0.4 | ||||
| thick | stainless steel, 0.024" (0.6 mm) | aluminum or 0.020" | (0.5 mm) thick | co | |
| Verify | that cabinets above the cooktop | are a maximum of | B=13" (330mm) |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Electrical requiements | You can | find | the identification plate with the electrical specifications on | the |
| underside of the appliance. See •Product Data Plate" under •Service" for da | |||
| location. | The | junction box must be located within 3 feet of the cooktop | co |
| It should | be | easily accessible for service purposes. |
|
12" Approximate
•J" Box
(Conduit approx. 3 feet)
Power Supply
Models CIT302DS, CIT304DS, CIT304EM
40 Amp circuit breaker
240 Volt, 3 Wire, 60 Hz
208 Volt, 3 Wire, 60 Hz
All with 1m flexible conduit (included)
6