Installation procedure
d CAUTION Installing the heat shield
Transport
Installer
For safety reasons, the heat shield must be properly installed. This prevents so components from overheating, avoiding the recirculation of hot air from the cooktop.
The heat shield is the same width as the cooktop.
For shipping, it is screwed to the burner box.
After unpacking the cooktop, unscrew the heat shield (see illustration).
Screw the heat shield to the base of the burner box using the preddrilled hole shown in the illustration.
The cooktop is1/3• | (85 mm) high. Once the heat shield has been installed, the |
total height of the | cooktop1/is• (135 mm). |
| 3 |
7